Control Lock - GE PT925SNSS - Profile 30" SC Convection Ovens Owner's Manual

Ge profile 30" built-in single/double convection wall oven
Hide thumbs Also See for PT925SNSS - Profile 30" SC Convection Ovens:
Table of Contents

Advertisement

Available languages

Available languages

Using the clock, kitchen timer and control lock.
Make sure the clock is set to the correct
time of day.
The Kitchen Timer is in hours and minutes.
The Kitchen Timer does not control oven
operations. The maximum setting on the
Kitchen Timer is 9 hours and 59 minutes.
Press and hold for 3 seconds.
To Set the Clock
The clock must be set to the correct time
of day for the automatic oven timing
functions to work properly. The time of day
cannot be changed during a timed baking
or self-cleaning cycle.
To Set the Kitchen Timer
Touch the TIMER pad.
Touch the number pads until
the amount of time you want shows
in the display. For example, to set
2 hours and 45 minutes, touch 2, 4
and 5 in that order. If you make
a mistake touch the TIMER pad
and begin again.
Touch the START pad.
To Reset the Kitchen Timer
If the display is still showing the time
remaining, you may change it by touching
the TIMER pad, then touch the number
pads until the time you want appears
in the display.
To Cancel the Kitchen Timer
Touch the TIMER pad twice.

Control Lock

Your control will allow you to lock out
the touch pads so they cannot be activated
when touched.
To lock/unlock the controls:
Touch and hold the 9 and 0 pads
for 3 seconds.
The oven display will show "Oven
controls locked" for several seconds,
then "Locked."
GEAppliances.com
Touch the CLOCK pad.
Touch the number pads.
Touch the START pad.
After touching the START pad, SET
disappears; this tells you the time is
counting down, although the display does
not change until one minute has passed.
Seconds will not be shown in the display
until the last minute is counting down.
When the Kitchen Timer reaches :00,
the control will beep 3 times followed
by one beep every 6 seconds until
the TIMER pad is touched.
The 6-second tone can be canceled by
following the steps in the Special features
of your oven control section under Tones
at the End of a Timed Cycle.
If the remaining time is not in the display
(clock, delay start or cooking time are in
the display), recall the remaining time by
touching the TIMER pad and then touching
the number pads to enter the new time
you want.
To unlock the control, touch and hold
the 9 and 0 pads for 3 seconds.
The CONTROL LOCK mode affects all
touch pads. No touch pads will work
when this feature is activated.
11

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pt925dnbbProfile pt925dnPt925

Table of Contents