Get List Of Environments; Set Environment; Wws Thermal Parameters; Get Me Stabiliza On - WORKSWELL WIRIS PRO User Manual

Answer
• -25.0 150.0

4.5.8 Get list of environments

Returns the list of available thermal environments. Each line is one environment.
Command
• GREL

4.5.9 Set environment

Sets the environment se ngs. Use just the maximum value of the range. This command can take up to 10
seconds to perform.
Command
• SREN 150.0
Answer
• OK

4.6 WWS Thermal Parameters

Specific parameters for WWS thermal camera.

4.6.1 Get me stabiliza on

Returns thermal camera me stabiliza on in seconds.
Command
• GTST
Answer
• 2.4

4.6.2 Set me stabiliza on

Sets thermal camera me stabiliza on in seconds.
Command
• STST 2.4
Answer
• OK
E-mail and Web Mobile:
support@workswell.eu +420 725 877 063
www.workswell.eu
4. COMMUNICATION PROTOCOL DESCRIPTION
Headquarters
ID:
U Albrechtova vrchu 12
Reg. No.: 29048575
155 00, Prague 13
VAT No.: CZ29048575
Czech Republic
Revision 1.1 EN, 11 th Sept, 2019
All pictures are only for illustra on.
Real values may vary.
15