Communica On Protocol Descrip On; Commands - Basic; Set Commands Delimiter - WORKSWELL WIRIS PRO User Manual

4

Communica on protocol descrip on

This chapter contains informa on about the TCP/IP communica on protocol and commands.
The server descrip on:
Port 2240
Text-based communica on protocol
Can be connected to with telnet so ware
Each command received by the server is at least acknowledged
The commands are case sensi ve, the server responses are always in upper case
All temperatures are in degrees Celsius
The most common responses are OK in case of success and ERR in case of error. When parameters are given or
returned, they are separated by one space.

4.1 Commands - Basic

Hereby the commands for controlling the WIRIS device follow. The basic commands can be used without the
Ethernet SDK ac va on.

4.1.1 Set commands delimiter

Set the delimiter for command messages. This delimiter is used for detec ng the end of a command. Default
value is LINE for the '\n' character. It can be changed to NULL for the '\0' character.
The LINE is used for telnet, the NULL is be er for so ware development.
Command
• SDLM NULL
Answer
• OK
E-mail and Web Mobile:
support@workswell.eu +420 725 877 063
www.workswell.eu
4. COMMUNICATION PROTOCOL DESCRIPTION
Parameter
Protocol
Port number
Table 4.1 – Protocol parameters
Headquarters
ID:
U Albrechtova vrchu 12
Reg. No.: 29048575
155 00, Prague 13
VAT No.: CZ29048575
Czech Republic
Value
TCP
2240
Revision 1.1 EN, 11
All pictures are only for illustra on.
Real values may vary.
th Sept, 2019
9