Table of Contents
Advertisement
Chapter 3: Installation--The Interface 1000 Customization Label
Instructions on how to change the label
Several copies of the default label (the instrument's serial number)
The first eight letters of the Greek alphabet (alpha through theta)
The eight planets in the solar system (Mercury through Neptune)
Several blank white labels
Pstat 1 through Pstat 16 on a blue background
Pstat 1 through Pstat 8 on a red background
You can cut any of these labels from the sheet and insert as the Interface 1000 Customization Label. The
white labels are provided to allow you to handwrite a label.
Label Files on the Gamry Website
If you want a professional-looking label not found on the label sheet provided, the label files on the Gamry
website
www.gamry.com
Product page. There are two files in Microsoft Excel
letter-sized paper and the other is formatted for European A4 paper.
After you download one of these files, you can open and edit it. If you don't have Microsoft Office on your
computer, free open-source Excel-compatible spreadsheet programs are available on the Internet. These free
programs will probably work well for simple edits and printing.
Each label is contained in one Excel cell. In addition to changing the text in a cell you can change the font, the
font size, and colors of the cell. Do not change the cell's size. The area toward the right side of each cell
appears in the Interface 1000 front panel.
Once you are satisfied with your edits, you can print the Excel file on any color printer. Heavy-grade paper is
preferred, although labels printed on standard-weight copier, inkjet, or laser-printer paper have been used.
The default instrument label sheet was printed on 120 g/m
paper).
Procedure to Change a Label
These instructions apply to all current members of the Gamry Instruments Interface family. Don't be confused
because some of the pictures were taken using an Interface 1000.
1)
If you are making a custom-printed label, edit the Excel
above. If you are using the Gamry-supplied label sheet, identify the location on the sheet where the
new label is found.
2)
If you are writing by hand on a blank label, do it now.
3)
Use scissors to cut out the new label. Cut white labels on the black lines.
4)
Power down the Interface 1000 that is receiving the new label.
5)
Remove the instrument's rubber front bezel (the rubber frame around the front panel). No tools are
required. See Figure 3-5.
may help. These files can be found in the Downloads tab of the Interface 1000
®
format. One file is formatted for American 8½" × 11"
2
paper (the US equivalent is 32-pound bond
®
file and print a label sheet as described
3 - 12
Advertisement
Table of Contents
