Interfaces; Interface Attributes - Huawei S7700 Hardware Description

S7700 Smart Routing Switch
Hardware Description
Table 5-31 Buttons and indicators on the VAMPA panel
Indicator/Button
RUN/ALM
ACT
LINK

5.7.4 Interfaces

Table 5-32
Table 5-32 Interfaces on the VAMPA and their functions
Interface
Console interface
Ethernet interface

5.7.5 Interface Attributes

This topic describes connector types, attributes, operation modes, and compliance standards of
the interfaces on the panel.
Table 5-33
Issue 02 (2012-09-10)
Color
Green
Red
Orange
Amber
Green-yellow
describes types and functions of interfaces on the VAMPA.
Quantity
1
1
and Table 5-34 describe attributes of the interfaces on the panel.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
If the indicator is on, it indicates that the board is
powered on but the software is not running.
If the indicator blinks slowly (0.5 Hz), it indicates
that the system runs normally.
If the indicator blinks quickly (4 Hz), it indicates that
the system is being started.
If the indicator is on, it indicates that the board is
faulty.
If the indicator is on, it indicates that the board is
installed in the slot and is powered on.
If the indicator blinks, it indicates that data is being
transmitted or received.
If the indicator is off, it indicates that no data is being
transmitted or received.
If the indicator is on, it indicates that the link is
connected.
If the indicator is off, it indicates that the link is
blocked.
Description
Provides a serial interface. A user can log in to the local
SPU by connecting the serial interface on the host and
the console interface on the SPU through a cable to
configure the SPU locally.
Provides an FE electrical interface. A user can log in to
the SPU through Telnet to configure the SPU.
5 Boards
83