Interfaces; Interface Attributes - Huawei S7700 Hardware Description

S7700 Smart Routing Switch
Hardware Description
Indicator/Button
ACT
RST

5.3.4 Interfaces

Table 5-15
Table 5-15 Types and functions of the interfaces on an MCUA board
Name
ETH (10M/100M
Base-TX auto-
sensing)
Console interface
MON interface
RS485 interface

5.3.5 Interface Attributes

This section describes the attributes of the interfaces on the MCUA.
l
Issue 02 (2012-09-10)
Color
Orange
Green
-
describes the types and functions of the interfaces on an MCUA board.
Quantity
1
1
1
1
NOTE
Currently, the S7700 does not support external PoE power supplies.
Table 5-16 describes the attributes of the 10M/100M Base-TX Ethernet interface.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
If the indicator is in orange, it indicates that
the MCUA is installed, and the board is
powered on.
This indicator shows whether the MCUA is
the master MCUA or the slave MCUA.
If the indicator is on, it indicates that the
MCUA is the master MCUA.
If the indicator is off, it indicates that the
MCUA is the slave MCUA.
Press this button to reset the board.
Description
Used to connect to the network interface of
the configuration terminal or the network
management workstation. The configuration
environment can be established onsite or
remotely.
Used to connect to the console interface to
implement the onsite system configuration of
the S7700.
Used to control environment monitoring.
Used to manage external PoE power supplies.
5 Boards
71