S7700 Smart Routing Switch
Hardware Description
Figure 5-15 Position of the CMUs
5.6.2 Function and Application
Function Description
The CMU consists of the following modules:
l
l
Application
The CMU is applied to the S7712, or S7706. There are two CMU slots on the subrack: one for
the master CMU and the other for the slave CMU. You can install one or two CMUs as required.
5.6.3 Panel
Figure 5-16
Figure 5-16 Appearance of the CMU
Buttons and Indicators on the Panel
Table 5-26
Issue 02 (2012-09-10)
Equipment management module: sends interface control signals for equipment
management.
Backplane interface module: sends all interface signals on the backplane to control the
power supply, fans, and master/slave states of CMU.
shows the appearance of the CMU panel.
describes the buttons and indicators on the CMU panel.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Boards
79