Inspection After Unpacking; Figure 2.4 Installing The Cut-Sheet Stand - Digital Equipment LA30 N Service Manual

2.4 Inspection after Unpacking

1. Carefully check the printer and the accessories for visible damage.
2. Install the cut-sheet stand (Figure 2.4). The cut-sheet stand enables smooth feeding of not only cut sheets
but continuous forms, and its paper guides position cut sheets for printing.
3. Install the platen knob.
4. Install the ribbon cartridge. See the User Guide for details.
5. Check the rated voltage for the printer and AC power outlet, then connect the AC power cord between the
printer and AC power outlet.
6. Close the front cover.
7. Turn on the power switch.
8. Load a cut sheet or continuous forms as explained in the User Guide.
Check printing performance and quality using self-test printing, detailed in Section 4.10.1 "Self-test print-
ing".
Mounting pins
2-4

Figure 2.4 Installing the cut-sheet stand

Cut-sheet stand
Paper guides