Instructions For The User; Control Panel - Viessmann VITOTRON 100 Installation And Service Instructions Manual

Instructions for the User

Control Panel

The control panel consists of two working areas: the
signaling area and control buttons. The user can select
the following working modes: winter mode (heating mode)
or summer mode (stand-by mode). Utilize the push button
arrows to scroll through the different working parameters
of the space heating water heater. The control panel
will automatically switch to main view if no buttons are
pressed within 1 minute. After learning the indicators
proceed to initial startup section.
Failures indication
Indicator Status
EEE Message on electronic display
12
Vitotron 100 Electric Space Heating Hot Water Heater Installation/Service
The control panel allows the user to identify flow rate
(GPM),the inlet and outlet operating temperatures and
the Btu/h of the space heating water heater at any given
time. It will also aid in identifying any faults, which may
occur, by displaying the fault codes.
Indicators
X 100 Btu/h = British thermal units per hour
psi = Pounds/Square Inch, pressure level
gpm= Gallons/minute or Flow rate
F° = Temperature (Fahrenheit)
Buttons
= Space heating water heater power
= Up and down selection
= Scroll option
Details
Data record error
Parameter out of range or a failed temperature sensor