Life Fitness PLATINUM CLUB Series Assembly Instructions Manual page 18

Troubleshooting the Treadmill
Malfunction
Unit resets randomly
or pauses.
16
Probable Cause
Power source is insufficient.
Damaged ground prong is on line
cord.
Line cord improperly seated in electri-
cal outlet.
Emergency stop magnet is not en-
gaged.
Towel or other item may be making
contact with stop switch while user is
running.
Stop switch is activated with very light
pressure or returns slowly after being
pressed.
Stop switch cable is not making proper
contact.
Main wire harness is pinched.
Ground path is open.
(continued)
Plug treadmill into an appropriate circuit.
Refer to Grounding Instructions.
Note: In North America use a dedicated 20
amp circuit for Commercial Units or a 15
amp circuit for Consumer Units.
Replace line cord.
Inspect power connection at electrical out-
let and at machine for proper contact.
Re-engage the emergency stop magnet.
Move all possible obstructions off display
console and handlebar.
Contact Life Fitness Customer Support
Services.
Contact Life Fitness Customer Support
Services.
Contact Life Fitness Customer Support
Services.
Contact Life Fitness Customer Support
Services.
Corrective Action