Mechanical Specifications; Heat Dissipation - Leadshine Technology CS-D1008E User Manual

2.3 Mechanical Specifications

(unit: mm [1inch=25.4mm])

2.4 Heat Dissipation

Temperature of the drive during working should be no more than 65℃ (149°F)

It is recommended to mount the drive vertically to maximize heat dissipation. Mount a cooling fan nearby if

necessary.
If multiple CS-D1008E drives are installed, it is suggested to keep a minimal 30mm (1.2 inches) between two of

them.
Figure 1: Mechanical specifications
CS-D1008E Closed Loop Stepper Drive User Manual
Page | 3