Table of Contents
Advertisement
Technical data
3
Technical data
Permissible
Nominal volt-
age, nominal
operating
frequency
conditions
Rotary speed
ranges
Permissible
ambient tem-
perature*
Sound level
cians of NetterVibration.
Type plate for
NED 605 and
NED 5016
The main voltage must comply with the nominal voltage indicat-
ed on the type plate.
Direct current 12 V or 24 V
Permissible Voltage deviation:
12 V +/- 2 V
24 V +/- 4 V
Changes of the unbalance settings influence the centrifugal
force. During operation, the maximum permissible centrifugal
force (according to the type plate) must not be exceeded.
The compliance with the electromagnetic compatibility directive
2014/30/EU has to be ensured.
3000 min
-20 °C to 40 °C
The maximum ambient temperature specified on the type plate
must not be exceeded. These values are valid for operation with
an ON-period of 100 %. For the following operation modes spe-
cial requirements apply:
cycled operation or
synchronous operation.
These must be clarified with
basis.
Depending on type ≤ 70 dB(A)
The sound level is determined to a great extent by the surface
upon which the NED is mounted (e.g. sheet metal). The sound
level will be amplified by non-silenced sheet metal.
* Higher temperatures are only possible after consultation with and written approval from the application techni-
-1
-1
or 3600 min
Netter
Vibration on a case-by-case
1
type designation
2
serial number
3
centrifugal force
4
rotary speed
5
current
6
power
7
nominal voltage
8
year of manufacture
9
degree of protection
10
duty cycle
7
Advertisement
Table of Contents
