Table of Contents
Advertisement
If the remote control transmitter needs a
G
new battery or is not operating properly,
contact a Yamaha dealer. Do not attempt
to replace the battery yourself.
1 Transmitter holder
NOTE:
While the engine is running, input from the re-
mote control transmitter is not received.
For Canada only
IC (Industry Canada) rules:
Operation is subject to the following two con-
ditions; (1) this device may not cause interfer-
ence, and (2) this device must accept any
interference received, including interference
that may cause undesired operation of the de-
vice.
Features and functions
EJU31150
Engine stop switch
Push the engine stop switch (red button) to
stop the engine normally.
1 Engine stop switch
EJU31160
Engine shut-off switch
Insert the clip, on the end of the engine shut-
off cord, under the engine shut-off switch
(black button). The engine will stop automati-
cally when the clip is removed from the
switch, such as if the operator falls off the wa-
tercraft.
1 Clip
2 Engine shut-off cord
3 Engine shut-off switch
EWJ00010
WARNING
Always attach the engine shut-off cord
G
to your left wrist and the clip to the en-
gine shut-off switch BEFORE starting
the engine.
28
Advertisement
Table of Contents
