VETEC V-LINK 67601 User Instructions page 3

Quick start guide
The instructi ons contained in this quick guide do not replace the full manu-
al. Make sure to read the whole manual carefully and correctly before use..
On/off
*The dynamometer will not automati cally turn off if not used.
Tare functi on
Tænd / Sluk
*The tare functi on will automati cally deacti vate when the dynamometer is turned off .
Peak hold /operati ng multi ple dynamometers with wireless display
Low batt ery
Tænd / Sluk
Press ON/OFF to turn on and off .
Once pressed, the display shows the soft -
ware version number for a few seconds.
Then the untared value will show.
To acti vate the tare functi on press and hold
→0← unti l the display shows 0 and the red
butt on lights.
Press →0← to deacti vate.
Press and hold MENU unti l the display shows
1. Use the arrows to choose between menu 1
and 2.
Menu 1: Peak hold functi on.
Menu 2: Operati ng multi ple Dynamometers.
!
See Advanced Setti ngs for complete instructi on.
The batt ery indicator will fl ash when the
batt ery is low and needs to be charged.