Operating Multiple Dynamometers In The Same Area ( Menu 2 ) - VETEC V-LINK 67601 User Instructions

Deacti vate peak hold
*Peak hold will not deacti vate when the dynamometer is turned off .
5.2 Operati ng multi ple dynamometers in the same area (menu 2)
Menu 2 is used when operati ng multi ple dynamometers with wireless displays in the same area. To
avoid interference each set of dynamometer and wireless display can be set to operate on its own
channel. In menu 2 it is possible to choose between 99 diff erent channels.
Acti vate menu 2 on the dynamometer
Selecti ng a channel on the dynamometer
*Repeat the above on another dynamometer and select a diff erent channel.
Acti vate menu 2 on the handheld display
Press and hold MENU unti l the display shows 1.
Select 1 by pressing ENTER.
The display now shows PE on.
Press unti l the display shows ·PEoFF.
Press ENTER to turn off Peak Hold.
Press RETURN to go to default setti ngs.
Press the ON/OFF butt on.
Press and hold MENU unti l the display shows 1.
Press to go to 2 (Menu 2).
Select 2 by pressing ENTER.
The display shows the default channel.
The fi rst digit is blinking which means that it can be
changed using the arrows.
Choose between 99 frequencies.
Select a channel by pressing ENTER.
Press RETURN to go back to weighing.
Press the ON/OFF butt on.
Press and hold MENU unti l the display shows 1.
Press to go to 2 (Menu 2).
Select 2 by pressing ENTER.
- 8 -