Basic Settings - VETEC V-LINK 67601 User Instructions

4. Basic setti ngs
Tænk og sluk
*The dynamometer will not automati cally turn off if not used.
Tare functi on
*The tare functi on will automati cally deacti vate when the dynamometer is turned off .
Low batt ery
Press ON/OFF to turn on and off .
Once pressed, the display will show the soft ware
version number for a few seconds.
Then the untared value will show.
To acti vate the tare functi on press and hold →0←
unti l the display shows 0 and the red butt on lights.
Press →0← to deacti vate.
The tare functi on will automati cally de-
acti vate when the dynamometer is turned off .
The batt ery indicator lights blue when charging.
The blue light will turn off when fully charged.
- 6 -