Menu / Advanced Settings; Peak Hold (Menu 1) - VETEC V-LINK 67601 User Instructions

5. Menu / Advanced settings

5.1. Peak hold (Menu 1)

Activate peak hold
*Peak Hold is as default off.
Repeat lift
Press the ON/OFF button.
Press and hold MENU until the display shows 1.
Select 1 (Menu 1) by pressing ENTER.
The display now shows PEoFF (Peak hold off).
Press to go to PE on (Peak hold on).
Press ENTER to activate Peak hold.
The display now shows 1.
Press RETURN to see the untared measurement.
Tryk RETURN for at gå tilbage til måling.
When peak hold is activated, the second button
lights up red.
Lift a load and the display will "freeze" at the
highest measurement recorded.
Press and hold →0← until the display shows 0.
Lift a load.
The display will "freeze" at the highest measure-
ment recorded.
Repeat the above if needed.
- 7 -