Table of Contents
Advertisement
6.1.3.2
Setting the Learn Cycle Properties
6.1.3.3
Starting a Learn Cycle Manually
6-12
you can start the learn cycles manually, and you can choose to receive
a reminder to start a manual learn cycle.
To set the learn cycle properties, perform the following steps:
1. Click the Physical tab to open the physical view.
2. Select the BBU icon in the left panel.
1. Click the Go To>BBU>Set Learn Cycle Properties.
The BBU operations screen appears in the right panel.
2. Choose one of the following two options:
a. To enable automatic learn cycles, click Enable automatic learn
cycles and click Go.
You can delay the start of the next learn cycle by up to 7 days
(168 hours) using the Delay next learn cycle field.
b. To disable automatic learn cycles, click Disable automatic learn
cycles and then click Go.
You can start the learn cycles manually. In addition, you can check
the box next to the field Remind me when to start a learn cycle to
receive a reminder to start a manual learn cycle.
To start the learn cycle properties manually, perform the following steps:
1. Click the Physical tab to open the physical view.
2. Select the BBU icon in the left panel.
3. Click Go To>BBU>Start Learn Cycle.
Another way to start the manual learn cycle is to right-click the BBU
icon and select Start Learn Cycle from the menu.
Using the Intelligent Battery Backup Unit
Advertisement
Table of Contents
