Using The Accessible Arm - Toshiba E-STUDIO 2020ac Information

1.Information About Equipment
External Interface Enabler (GS-1020)
Allows you to use the EWB function.
Unicode Font Enabler (GS-1007)
Allows you to print from the SAP environment using Unicode font.
Multi Station Print Enabler (GS-1090)
Allows you to use the Multi Station Print function.
USB Hub (GR-1420)
Allows you to add a USB port to connect a USB storage device.
FIPS Hard Disk Kit (GE-1260)
You can use hard disks that comply with the Federal Information Processing Standard (FIPS140-2) of the U.S.A or
JCMVP of Japan.
SSD (GE-1280)
Allows you to add an SSD with an encryption function.
 Depending on the model, options may already be installed and available.
 Some options may not be available in some regions.
 Using the Accessible Arm
A user in a wheelchair can close the Reversing Automatic Document Feeder, Dual Scan Document Feeder, or Original
Cover using the Accessible Arm.
Hold the Accessible Arm.
1
Hook the Accessible Arm over the top of the Reversing Automatic Document Feeder, Dual Scan
2
Document Feeder, or Original Cover to close them.
 Store it near the equipment. When it is stored by putting it on the equipment, choose somewhere where there is no
interference with the paper supply, paper misfeeding release or toner replacement.
 Do not use this for any purposes other than closing the device.
Options 27