Table of Contents
Advertisement
SPECIFICATIONS
WEATHER STATION (328-1414)
• Indoor Temp. Range:
• Indoor Humidity Range:
• Relative Pressure Range:
(800 to 1100 hPa)
Power Requirements:
(included) AC6: GPU280500150WAOO
Input: 5.0VAC 150mA.
Optional: 3 "AA" LR6 Batteries (not included)
The plug on the power adapter is intended to serve
as the disconnect device, the socket-outlet shall
be installed near the equipment and shall be easily
accessible.
• Station Dimensions:
(22.8cm L x 2.6cm W x 13.8cm H)
• Language Options:
English, Spanish, French, and German
(Translation Available for Menus & Calendar)
BREEZE SENSOR (TX145WSDTHv3)
• Wind Speed Range:
• Degrees of Wind Direction:
Directions
• Outdoor Temp. Range:
• Outdoor Humidity Range:
• Transmission Range:
• Power Requirements:
• Update Interval:
Every 31 Seconds
• Sensor Dimensions:
•
With Bracket: 11.97" L x 6.25" W x 9.76" H
(30.41cm L x 15.88cm W x 24.8cm H)
•
Without Bracket: 7.94" L x 6.25" W x 6.99" H
(20.17cm L x 15.88cm W x 17.75cm H)
32°F to 122°F (0°C to 50°C)
10 to 99%RH
23.62 to 32.48 InHg
5-volt power adapter
8.98" L x 1.00" W x 5.43" H
0 to 111 mph (0 to 178 kMh)
360° with 16 Cardinal
-40°F to 140°F (-40°C to 60°C)
10 to 99%RH
330 feet (100 meters)
3 "AA" batteries (not included)
RAIN SENSOR (TX145R)
• Rainfall Range:
0-9999mm (0-393.6 in)
• Transmission Range:
• Power Requirements:
(not included)
• Update Interval:
Every 45 Seconds
• Sensor Dimensions:
7.16" L x 5.24" W x 5.04" H
(18.2 cm L x 13.3 cm W x 12.8 cm H)
CARE + MAINTENANCE
Battery Replacement Instructions
When batteries of different brand or type are used
together, or new and old batteries are used together,
some batteries may be over-discharged due to a
difference of voltage or capacity. This can result
in venting, leakage, and rupture and may cause
personal injury.
•
Always purchase the correct size and grade of
battery most suitable for the intended use.
•
Always replace the whole set of batteries at one
time, taking care not to mix old and new ones, or
batteries of different types.
•
Clean the battery contacts and also those of the
device prior to battery installation.
•
Ensure the batteries are installed correctly with
regard to polarity (+ and -).
•
Remove batteries from product during periods of
non-use. Battery leakage can cause corrosion and
damage to this product.
•
Remove used batteries promptly.
•
For recycling and disposal of batteries, and
to protect the environment, please check the
internet or your local phone directory for local
recycling centers and/or follow local government
regulations.
330 feet (100 meters)
2 "AA" batteries
22
Advertisement
Table of Contents
