Panasonic CS-MS9SD3H Service Manual page 29

EMBEDDED TYPE
Preparation: Make 2 holes for screws using a driver.
Mount the top case.
• Align the claws of the
top case and then
align the claws of the
bottom case.
Avoid the wire
being caught.
Claw (2 places)
Connect the remote control wiring.
Bottom case (Back side)
Mount the bottom case to the wall.
• Pass the wire through the hole in
the centre of the bottom case.
Claw
Hole for screw
Wood screw (supplied)
Terminal board
Top case
(Back side)
29