ekwb EK-Quantum Vector2 FE RTX 4090 D-RGB User Manual page 11
Gpu water block
Hide thumbs
Also See for EK-Quantum Vector2 FE RTX 4090 D-RGB:
- Manual (21 pages) ,
- User manual (21 pages) ,
- User manual (18 pages)
Table of Contents
Advertisement
M2.5 x 4 AX1 SCREW
STEP 2
STEP 2
Use five (5) M2.5 x 4 AX1 Screws and PVC washers to tighten
the PCB on the water block. Tighten the screws evenly using the
M2.5 PVC
Phillips-head screwdriver. EK recommends you start tightening the
WASHER
screws around the GPU core first, and then continuing outward to
prevent damage to the GPU.
For this step, you will need:
M2.5 x 4 AX1
Screw (5 pcs)
Screws must be present in the places marked on the picture.
- 11 -
Polyamide Washer
Phillips Head
(5 pcs)
Screwdriver
Advertisement
Table of Contents
Need help?
Do you have a question about the EK-Quantum Vector2 FE RTX 4090 D-RGB and is the answer not in the manual?