Do you have a question about the SPH22002 and is the answer not in the manual?
Questions and answers
Bradley Leroy Koenig
February 14, 2025
how to assemble to the stand
1 comments:
Mr. Anderson
May 14, 2025
To assemble the EAST OAK SPH22002 heater to the stand:
1. Two people are recommended for the assembly. 2. The heater comes with a sturdy stand and brackets for wall mounting, but if using the stand, proceed with attaching it. 3. There are two different sizes of fasteners, but the instruction booklet is not clear about which to use. Refer to the video linked in the product listing for guidance. 4. When attaching the heater to the stand, support the heater properly and tighten the screws securely. 5. A second person should help hold the heater steady while fastening it to the stand to ensure proper alignment and safety. 6. Be aware that a hex screw driver is included, but you may also need a quad screwdriver for some screws.
Make sure all screws are tightened properly to prevent the heater from rotating or being unstable.
Page 1
1500W Electric 2-in-1 Wall Mount Patio Heater Owner’s Manual SPH22002 with Adjustable Stand...
Page 3
eastoak.com Question? Comments? Reach out to us to get expert support! support@eastoak.com eastoak.com 1-833-EAST-OAK (USA) (1-833-327-8625) Follow eastoakliving on Claim 3-year warranty at eastoak.com/warranty EASTOAK.COM 2-IN-1 WALL MOUNT ELECTRIC HEATER...
IMPORTANT CAUTION Please verify all parts and components present and check for any damaged pieces before assembly. If you have any damaged or missing parts, please contact customer service at support@eastoak.com. • Some parts may contain sharp edges and may cause injury or property damage.
Page 5
It can use in open bars, courtyards, plazas, and stations. Welcome warmth and the perfect amount of heat into your life now with East Oak’s Infrared Electric Heater. EASTOAK.COM 2-IN-1 WALL MOUNT ELECTRIC HEATER...
SAFETY GUIDE When using any electrical appliance, including this infrared heater, basic safety precautions must be followed to reduce the risk of fire, shock, or injury. Please read all instructions before using this appliance: • This heater becomes extremely hot when in use. To minimize risk of burns or injury, do not touch any part of the heater when in use.
• All parts of this heater may become extremely hot when in use. Do not touch the appliance and ensure there is no combustible material around the product. Misuse may result in fire, shock, damage, or injury. • In case of an emergency, such as shock or fire, turn off the heater and unplug the appliance immediately.
REMOTE CONTROL GUIDE Remote control distance works up to 3-4 m. For optimal usage, align the remote to the receiver as illustrated here. Max. remote distance: 5 M NOTICE • The remote control works with 2 AAA 1.5V batteries (sold separately). If the appliance will not be in use, remove the batteries from the remote to minimize any risk of damage.
Page 10
OPERATION INSTRUCTION Inspect all components, including the main unit, supply cord, and plugs, for any signs of damage. Take off all screws. If any parts or hardware pieces are missing or damaged, please contact customer service at support@eastoak.com. In your email, include your shipping address and product information.
Page 11
Adjust the required angle of the heater, and tighten the T-nut. • Don’t move or cover the heater while it is working. • Warn that the heater must be installed appropriately before it is used. • Connect the plug to the socket. •...
WARRANTY GUARANTEED 3-YEAR WARRANTY Thank you for choosing East Oak. This product is covered by our company warranty for up to 3 years from its original purchase date. CLAIM WARRANTY To claim your product’s warranty, register your new product on our website at www.eastoak.com/warranty.
Need help?
Do you have a question about the SPH22002 and is the answer not in the manual?
Questions and answers
how to assemble to the stand
To assemble the EAST OAK SPH22002 heater to the stand:
1. Two people are recommended for the assembly.
2. The heater comes with a sturdy stand and brackets for wall mounting, but if using the stand, proceed with attaching it.
3. There are two different sizes of fasteners, but the instruction booklet is not clear about which to use. Refer to the video linked in the product listing for guidance.
4. When attaching the heater to the stand, support the heater properly and tighten the screws securely.
5. A second person should help hold the heater steady while fastening it to the stand to ensure proper alignment and safety.
6. Be aware that a hex screw driver is included, but you may also need a quad screwdriver for some screws.
Make sure all screws are tightened properly to prevent the heater from rotating or being unstable.
This answer is automatically generated