Sony VPL-CS1 Service Manual page 17

4
Press the M or m key to select the SET SETTING menu, then press the ,
or ENTER key.
The selected menu appears.
INPUT-A
SET SETTING
STATUS: ON
INPUT-A: RGB
KEYSTONE MEMORY: OFF
DIGITAL KEYSTONE: OFF
LANGUAGE: ENGLISH
POWER SAVING: OFF
SIRCS RECEIVER: FRONT&REAR
LAMP TIMER: 00010h
5
Press the M or m key to select "LANGUAGE," then press the , or
ENTER key.
INPUT-A
SET SETTING
STATUS: ON
INPUT-A: RGB
KEYSTONE MEMORY: OFF
DIGITAL KEYSTONE: OFF
LANGUAGE: ENGLISH
POWER SAVING: OFF
SIRCS RECEIVER: FRONT&REAR
LAMP TIMER: 00010h
6
Press the M or m key to select a language, then press the < or ENTER
key.
The menu changes to the selected language.
To clear the menu
Press the MENU key.
The menu disappears automatically if a key is not pressed for one minute.
20
GB
Selecting the Menu Language
Projecting
Rear remote
control detector
RESET
R.CLICK
1
FUNCTION
INPUT
2
1
Open the front cover, plug the AC power cord into a wall outlet, then
connect all equipment.
The ON/STANDBY indicator lights in red and the projector goes into
standby mode.
2
Press the I /
1 key.
The ON/STANDBY indicator lights in green.
3
Turn on the equipment connected to the projector.
4
Press the INPUT key to select the input source.
To input from
Computer connected to the INPUT A connector
Video equipment connected to the video
connector
1) If you connect to both the S VIDEO and VIDEO jacks, the signal from the S
VIDEO jack is selected.
1
5
6
MENU POWER
2
4
INPUT
ENTER
APA key
APA
VOLUME
VOLUME +/–
keys
LAMP/ COVER ANDBY
FAN/TEMP POWER SAVING ON/ST
ON/STANDBY indicator
2
4
Press INPUT to display
INPUT A
1)
input VIDEO
21
Projecting
GB