Sony VPL-CS1 Service Manual page 16

To connect a 15k RGB/Component equipment
Rear side
AUDIO MOUSE VIDEO S VIDEO INPUT A
Stereo audio
connecting
SMF-402 Signal Cable (not supplied)
3 × phono jack ↔ HD D-sub 15-pin (male)
cable (not
supplied)
Notes
et the aspect ratio using ASPECT in the INPUT SETTING menu
• S
according to the input signal.
you connect the unit to 15k RGB/component video equipment,
• When
select RGB or component with the INPUT-A setting in the SET
SETTING menu.
se the composite sync signal when you input the external sync signal
• U
from 15k RGB/component equipment.
18
GB
Connecting the Projector
to RGB/
component
to audio
output
output
15k RGB/Component equipment
Selecting the Menu Language
You can select one of seven languages for displaying the menu and other on-
screen displays. The factory setting is English.
1
1
Open the front cover, then plug the AC power cord into a wall outlet.
2
Press the I / 1 key to turn on the projector.
3
Press the MENU key.
The menu appears.
The menu presently selected is shown as a yellow button.
INPUT-A
PICTURE CTRL
CONTRAST: 8 0
BRIGHT:
5 0
GAMMA MODE: GRAPHICS
COLOR TEMP: HIGH
3
POWER
RESET MENU
2
INPUT
ENTER
APA
VOLUME
– +
4,5,6
LAMP /COV ER BY
POWER SAVING ON/S TAND
FAN/TEMP
19
Selecting the Menu Language
GB