3.10 User Lock Option (Disable)
Use "UP" button
to enter existing
password.
Press "DOWN"
button until "0" is
displayed.
3.11 User Lock Option (Entering Pass Code)
If LOC is briefly displayed when attempting to change a heat pump's settings followed by a "0", the heat
pump is in a user-lock mode. A numerical passcode is required to proceed.
Press "UP" or
"DOWN" arrow
to enter user lock
code.
NOTE -
After three seconds of inactivity, the heat pump's display lock will activate. See "Display
l
Lock" on page 2.
If the user-lock code has been misplaced, please contact AquaCal
l
further assistance.
Press "Pool / Spa"
button to unlock.
Press "POOL /
SPA" button to
unlock.
Hold "UP" and
"DOWN" buttons
until CF1 is
displayed.
®
Press "POOL /
SPA" button until
ULC is displayed
Customer Service for
Page - 7