Table of Contents
Advertisement
Product ID SAE
Fig. 2 Label Product ID SAE
1
Part number
3
Manufacturing number
3.2
Labels EU and UK
CCID Caution EU and UK Webasto
1
2
3
Fig. 3 Label CCID Caution EU and UK Webasto
1
Technical specifications
3
Address information
Product ID IEC
Fig. 4 Label Product ID IEC
1
Part number
3
Manufacturing number
5911743-A-01 Webasto Go
1
2
3
2
Serial number
2
Light indicator
1
2
3
2
Serial number
3.3
Unit description
4
3
Fig. 5 Webasto Go Mobile Charger
1
Type 1 IEC Coupler
3
Low Power Adapter
Charger model
(North America)
Voltage (V AC)
Maximum current (A)
32 A max continuous 32 A max continuous
Frequency (Hz)
Power draw at idle (W)
During charging (W)
Approx. 20 ft / 6.1 m Approx. 18.4 ft / 5.6
Cable length (ft / m)
Weight: (lbs / kg)
Temperature – operat-
ing: (C / F)
Temperature – storage:
(C / F)
CCID environmental
NEMA 6 (watertight)
rating: (NEMA/IP)
Ventilation
Specifications are subject to change without notice.
Usable for Indoor and Outdoor
The Webasto Go Mobile Charger comes standard with two ad-
apters:
l One high power adapter
l One low power adapter
Please refer to your vehicle owner's manual for details on in-
cluded and available adapters and accessories.
3.4
Safety features
The Webasto Go Mobile Charger is designed with your safety as
the highest priority and includes the following safety features to
protect against the risk of electric shock:
l Service Ground Check: The charger constantly checks for
the presence of a service ground connection. If the service
ground ever fails, the charger RED Indicator turns ON and
shuts down power to the vehicle.
l Thermal Event Sensor: Charger module senses out-of-or-
dinary thermal events and will decrease charging current or
shut the unit down if required.
l GFCI Protection: The Webasto Go Mobile Charger is
equipped with a ground fault circuit interruption (GFCI) re-
action system to protect against electric shock. If the char-
Technical data | 3
2
Type 2 SAE Coupler
4
High Power Adapter
SAE
IEC
(Europe)
120 - 240 V AC
230 V AC
60 Hz
50 Hz
< 2 W
< 2 W
< 4 W
< 4 W
8.6 lbs / 3.9 kg
9.2 lbs / 4.2 kg
-22 °F to +122 °F
-22 °F to +122 °F
-30 °C to + 50 °C
-30 °C to +50 °C
-22 °F to +185 °F
-22 °F to +185 °F
-30 °C to +85 °C
-30 °C to +85 °C
IP67 (watertight)
Not required
Not required
1
2
m
5 / 12
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the Go and is the answer not in the manual?
Questions and answers
How to remove the 110-volt adapter and replace it with a 220-volt adapterfrom the Webasto charger
To replace the 110-volt adapter with the 220-volt adapter on the Webasto Go charger:
1. Unplug the 110-volt adapter from the control box.
2. Take the 220-volt (40 amp) adapter, which is the larger of the two provided.
3. Firmly push the 220-volt adapter into the control box until it clicks into place.
4. Ensure the LED on the control box turns blue, indicating it is ready to charge.
5. If the LED turns amber, the adapter is not fully inserted.
6. If the LED turns red, there may be a ground fault—contact Webasto support or an electrician.
This answer is automatically generated