Installer Settings - Daikin Altherma 3 R ECH2O Installer's Reference Manual

11.5.9 Installer settings

ERLA11~16DAV3+W1 + EBSH/X(B)11+16P30+50DF
Daikin Altherma 3 R ECH₂O
4P663482-1B – 2022.07
Item
c Sensor values
c1 R1T Leaving water temperature [°C]
c2 R2T Leaving water temperature after BUH [°C]
c3 R3T Liquid line refrigerant temperature [°C]
c4 R4T Return water temperature [°C]
c5 R5T Storage tank temperature [°C]
c6 R6T Ambient temperature [°C]
c7 R7T Leaving water temperature after storage tank [°C]
P Water pressure [bar]
V Water volume flow rate [l/min]
Possible read-out information
In menu...
[8.1] Energy data
[8.2] Malfunction history
[8.3] Dealer information
[8.4] Sensors
[8.5] Actuators
[8.6] Operation modes
[8.7] About
[8.8] Connection status
[8.9] Running hours
[8.B] Piping diagram
Overview
The following items are listed in the submenu:
11
|
Description
You can read out...
Produced energy, consumed electricity,
and consumed gas, energy flow diagram
Malfunction history
Contact/helpdesk number
Room, tank or domestic hot water,
outside, and leaving water temperature
(if applicable)
Status/mode of each actuator
Example: Domestic hot water pump
ON/OFF
Current operation mode
Example: Defrost/oil return mode
Version information about the system
Information about the connection
status of the unit, the room thermostat
and the LAN adapter.
Running hours of specific system
components
Real-time sensor and actuator
information of the main system
components
Configuration
Installer reference guide
219