Table of Contents
Advertisement
8. Room temperature offset (+9°F to - 9°F) (+5°C to -5°C).
Adjust to calibrate displayed room temperature to match actual room temperature.
Press the PROG button to advance to the next screen.
9. Maximum compressor cycles allowed per hour (d, 2-6).
– – = as many as needed, 2-6 = maximum cycles/hour
Press the PROG button to advance to the next screen.
10. Status indicator light (ON, OFF).
Press the
or
button to select.
To exit configuration mode, press the PROG button for 6 seconds.
Note: First button press activates backlight only.
1. Move the Fan Auto/On switch to the Auto position.
2. Press the MODE button to enter desired operating mode.
3. Press PROG to select program or non-program option.
Once the thermostat is installed, it should be thoroughly tested.
Do not energize the air conditioning system when the outdoor temperature is below 50 degrees.
Cool Test
All manuals and user guides at all-guides.com
Starting the Thermostat
Testing the Thermostat
CAUTION
It can result in equipment damage or personal injury.
ON
7
Advertisement
Table of Contents
