Table of Contents
Advertisement
• Set time is displayed
8. Press the
or
button to change set time.
9. Press the PROG button to advance to the next screen.
Note: Transitions required after 11:59 PM must be programmed in the next day's
MORN transition.
• Heat temperature is displayed (45°F to 90°F)
10. Press the
or
button to adjust heat set temperature.
11. Press the PROG button to advance to the next screen.
• Cool temperature is displayed (45°F to 90°F)
Note: Cool cannot be set lower than heat temperature.
12. Press the
or
button to adjust cool set temperature.
13. Press the PROG button to advance to the next screen.
Repeat steps 1-13 to program each day of the week individually or use the Simpleset
feature (see Page 14) to program every day the same as Monday.
When programming is complete, press and hold the PROG button in for 5 seconds to return to the OFF mode.
PROG must display on the screen for the thermostat to follow the program schedule. If PROG does not appear,
press the PROG button until PROG displays.
Simpleset
®
programming is a convenient method of programming the thermostat. Once the entire Monday (Day 1)
schedule is set, Simpleset
After the complete Monday schedule is set (see Programming on Page 12), you are at the Day 2 screen:
1. Press the
button once. Day 1 screen displays.
2. Press and hold the
All manuals and user guides at all-guides.com
Simpleset® Programming
programming will copy the Monday schedule to every day of the week.
®
button for 3 seconds.
®
13
Advertisement
Table of Contents
