Table 1-12: Safety Certification Compliance; Table 1-13: Safety Standards - Tektronix 2715 Service Manual

Specifications
Table 1- 12: Safety Certification Compliance
Category
Temperature (operating)
Altitude (maximum operating)
Relative Humidity (maximum op-
erating)
Equipment Type
Safety Class
Overvoltage Category
Pollution Degree
Table 1- 13: Safety Standards
Category
U.S. Nationally Recognized
Testing Laboratory Listing
Canadian Certification
European Union Compliance
Additional Compliance
1- 24
+5° C to +50° C
2000 meters (6562 ft.)
80% for temperatures up to 31° C, decreasing linearly to 50% at 40° C
Test and Measuring
Class I (as defined in IEC 1010-1, Annex H)—grounded product
Overvoltage Category II (as defined in IEC 1010-1, Annex J)
Pollution Degree 2 (as defined in IEC 1010-1)
Note: Rated for indoor use only.
UL1244 - - Standard for Electrical and Electronic Measuring and Testing Equipment
CAN/CSA C22.2 No. 231 – Safety Requirements for Electrical and Electronic Measuring and Test
Equipment
Low Voltage Directive 73/23/EEC, as Amended by 93/68/EEC
EN61010-1/A1 – Safety Requirements for Electrical Equipment for
Measurement, Control, and Laboratory Use
UL3111-1 – Standard for Electrical Measuring and Test Equipment
IEC1010-1 – Safety Requirements for Electrical Equipment for
Measurement, Control, and Laboratory Use
Description
Standards
2715 Spectrum Analyzer Service Manual