Advertisement
CAUTION IN SERVICING
Firmware upgrade
When B/E units are exchanged, it is necessary to execute the upgrade of B/E Firmware and S/P Setting(TSP file).
When F/E units are exchanged, it is necessary to execute the upgrade of F/E Firmware .
1. Initializing for system
1. Press ON/STANDBY button while simultaneously pressing 8 /- and +/ 9 buttons.
2. Check that "Initializing" is displayed in the FL tube upper row, and release your fingers from the 2 buttons and the
microprocessor will be initialized.
2. Initializing for BD
*The following operations must use remote control.
2.1
Reset
1. Turn on the power on DISC Function and display the HOME MENU.
2. Select the Setting on OSD screen, then press the Cursol 1 button.
3. Press the Cursol d button 3 times. Select the System.
4. Press the Cursol 1 button, then press the Cursol f button several times. Select the Reset Settings in lowest.
5. Press the ENTER button, then select OK. Press the ENTER button again.
2.2
Set Parental
1. Turn on the power on DISC Function and display the HOME MENU.
2. Select the Setting on OSD screen, then press the Cursol 1 button.
3. Press the Cursol f button 3 times, then select the Parental.
4. Press the Cursol 1 button, then select the Parental Control.
5. If password is demanded, input "0000". Then press the OK button.
6. Parental Control is set to Off.
Note:
• All user settings will be lost and this factory setting will be recovered when this initialization mode.
So make sure to m+emorize your setting for restoring after the initialization.
Service tools
Measuring Disc:
s
d
d1f
CD/TCD-784
DVD/VT502 or TDV-520A
BD/ABD-520 or BLX-108
8/ -
ENTER
6
+/ 9
Advertisement
