Denon RCD-N9 Service Manual
  1. Manuals
  2. Brands
  3. Denon Manuals
  4. Receiver
  5. CEOL RCD-N9
  6. Service manual

Denon RCD-N9 Service Manual

Network cd receiver
Hide thumbs Also See for RCD-N9:
Table of Contents

Advertisement

Quick Links

Download this manual
e
RCD-N9
• For purposes of improvement, specifications and design are subject to change without notice.
• Please use this service manual with referring to the operating instructions without fail.
• Some illustrations using in this service manual are slightly different from the actual set.
S0931-1V02DM/DG1411
SERVICE MANUAL
MODEL
NETWORK CD RECIEVER
Copyright 2014 D&M Holdings Inc. All rights reserved.
WARNING: Violators will be prosecuted to the maximum extent possible.
JP
E3
E2
P
P
e
D&M Holdings Inc.
Ver. 2
Please refer to the
MODIFICATION NOTICE.
EK
EA
E1
E1C E1K

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RCD-N9 and is the answer not in the manual?

Questions and answers

Related Manuals for Denon RCD-N9

Summary of Contents for Denon RCD-N9

  • Page 1 MODIFICATION NOTICE. SERVICE MANUAL MODEL E1C E1K RCD-N9 NETWORK CD RECIEVER • For purposes of improvement, specifications and design are subject to change without notice. • Please use this service manual with referring to the operating instructions without fail. • Some illustrations using in this service manual are slightly different from the actual set.

  • Page 2: Table Of Contents

    CONTENTS ABOUT THIS MANUAL .............3 What you can do with this manual ..........3 Using Adobe Reader (Windows version) ........4 SAFETY PRECAUTIONS ............6 NOTE FOR SCHEMATIC DIAGRAM .........7 NOTE FOR PARTS LIST ............7 TECHNICAL SPECIFICATIONS ..........9 DIMENSION ................9 Precautions During Service...........10 Initializing This Unit ..............10 JIG FOR SERVICING .............10 Procedure after Replacing the WLAN MODULE .....10...

  • Page 3: About This Manual

    ABOUT THIS MANUAL Read the following information before using the service manual. What you can do with this manual Search for a Ref. No. (phrase) Jump to the target of a schematic diagram connector (Ctrl+Shift+F) You can use the search function in Acrobat Reader to search for a Ref.

  • Page 4: Using Adobe Reader (Windows Version)

    Using Adobe Reader (Windows version) Add notes to this data (Sign) Magnify schematic / printed circuit board diagrams - 1 TheSignfunctionletsyouaddnotestothedatain (Ctrl+Space, mouse operation) this manual. Savethefileonceyouhavefinishedaddingnotes. Press Ctrl+Spaceonthekeyboardanddragthe [Example using Adobe Reader X] mousetoselecttheareayouwanttoview. On the "View" menu, click "Sign". • Theselectedareaismagnified.
  • Page 5 Magnify schematic / printed circuit Magnify schematic / printed circuit board diagrams - 2 board diagrams - 3 (Pan & Zoom function) (Loupe Tool function) ThePan&Zoomfunctionletsyouseewhichpartof TheLoupeToolfunctionletsyoumagnifyaspecific amagnifieddiagramisbeingshowninaseparate part of a diagram in a separate window. window. [Example using Adobe Reader X] On the "View"...

  • Page 6: Safety Precautions

    SAFETY PRECAUTIONS The following items should be checked for continued protection of the customer and the service technician. leakage current check Beforereturningthesettothecustomer,besuretocarryouteither(1)aleakagecurrentcheckor(2)alinetochassis resistance check. If the leakage current exceeds 0.5 milliamps, or if the resistance from chassis to either side of the power cord is less than 460 kohms, the set is defective.

  • Page 7: Note For Schematic Diagram

    NOTE FOR SCHEMATIC DIAGRAM WARNING: Partsindicatedbythe z markhavecriticalcharacteristics.UseONLYreplacementpartsrecommendedbythemanufacturer. CAUTION: Beforereturningthesettothecustomer,besuretocarryouteither(1)aleakagecurrentcheckor(2)alinetochassisresistancecheck. If the leakage current exceeds 0.5 milliamps, or if the resistance from chassis to either side of the power cord is less than 460 kohms, the set is defective. WARNING: DONOTreturnthesettothecustomerunlesstheproblemisidentifiedandremedied.
  • Page 8 WARNING WAARSCHUWING Alle IC’s en vele andere halfgeleiders zijn gevoelig All ICs and many other semi-conductors are voor elektrostatische ontladingen (ESD). susceptible to electrostatic discharges (ESD). Onzorgvuldig behandelen tijdens reparatie kan de Careless handling during repair can reduce life levensduur drastisch doen verminderen. drastically.

  • Page 9: Technical Specifications

    TECHNICAL SPECIFICATIONS n n Audionsection n n WirelessnLANnsection •n CDnplayernsection Networkntypen Conforming to IEEE 802.11b (wirelessnLANn Conforming to IEEE 802.11g Playablenfrequencynresponse：10Hz – 20kHz standard)： Conforming to IEEE 802.11n Wown&nflutter：Belownmeasurablenlimitsn(±n0.001n%) (Wi-Fi® compliant)z1 Samplingnfrequency：44.1kHz Security： WEP 64bit, WEP 128bit WPA/WPA2-PSK(AES) •n Audionsection WPA/WPA2-PSK(TKIP) Ratednoutput：n 2 -channeln Radionfrequency：...

  • Page 10: Precautions During Service

    PRECAUTIONS DURING SERVICE Initializing This Unit Initialize this unit if you have replaced the microcomputer, one of the parts around the microcomputer, or the digital PCB. In "STANDBY" status, press and hold the "CURSOR u " and "INPUT SOURCE" buttons along with the power opera- tion button to turn on the power.

  • Page 11: Measurement Of Board Test Points

    1. Remove all of the screws from the MAIN PCB, SMPS PCB, CD Mecha, CD Foot, NET PCB, USB PCB and chassis (CD Mecha and CD Foot are for the RCD-N9 only). 2. Remove the SMPS PCB, CD Mecha and CD Foot (CD Mecha and CD Foot are for the RCD-N9 only). 3. Remove the molded parts from the back panel.
  • Page 12 RemovingnthenAMPnPCBnfromnthenMAINnPCB Be careful of the following two points when removing and reattaching the AMP PCB to the MAIN PCB. 1. Wait for approximately 5 minutes after turning the power off before removing the wire connector that connects the SMPS PCB and AMP PCB. When connected to the SMPS PCB wire connector, a surge current may occur due to the charge stored in the AMP PCB causing damage to the D-AMP IC70.

  • Page 13: Note Handling And Replacement Of The Laser Pick-Up

    NOTE HANDLING AND REPLACEMENT OF THE LASER PICK-UP 1. Protection of the LD Short a part of the LD circuit by soldering. After connection to a circuit, remove the short solder. 2. Precautions when handling the laser CD mechanism • Handle the laser pick-up so that it is not exposed to dust.

  • Page 14: Disassembly

    DISASSEMBLY • Remove each part in the order of the arrows below. • Reassemble removed parts in the reverse order. Read "PrecautionsnDuringnWork" before reassembling removed parts. • • If wire bundles are removed or moved during adjustment or part replacement, reshape the wires after completing the work.

  • Page 15: Rear Mold Panel

    ExplanatorynPhotosnfornDISASSEMBLY • The angles from which the photos are taken are shown by "Photonangle：A,nB,nC,nD". • See the diagram below about the shooting direction of each photograph. • Photographs with no shooting direction indicated were taken from the top of the unit. •...

  • Page 16: Side Panel

    2. SIDE PANEL → Proceedingn ： REARnMOLDnPANEL SIDEnPANEL (1) Remove the screws. Front side STEP1 STEP1 STEP2 STEP2 TOP SIDE TOP SIDE View from the bottom 3. TOP PANEL ASSY → → Proceedingn ： REARnMOLDnPANEL SIDEnPANEL TOPnPANELnASSY (1) Remove the screws. Remove the FFC. ↑Shooting direction: A↑...

  • Page 17: Cd Mecha Assy

    4. CD MECHA ASSY → → → Proceedingn ： REARnMOLDnPANEL SIDEnPANEL TOPnPANELnASSY CDnMECHAnASSY (1) Tray is opened and CD DOOR is removed. View from the bottom View from the CD MECHA bottom (2) Remove the screws. Remove the connector. CN82 CN80 ↑Shooting direction: B↑...

  • Page 18: Ethernet Pcb Assy

    5. ETHERNET PCB ASSY → → → Proceedingn ： REARnMOLDnPANEL SIDEnPANEL TOPnPANELnASSY ETHERNETnPCBnASSY (1) Remove the screws. Remove the connector wire and FFC. PCB Combination releasing direction. CN92 CN62 WF60 CN63 ↑Shooting direction: A↑ ↑Shooting direction: C↑ 6. CD PCB →...

  • Page 19: Shield Case

    7. SHIELD CASE → → → → Proceedingn ： REARnMOLDnPANEL SIDEnPANEL TOPnPANELnASSY CDnMECHAnASSY SHIELDnCASE (1) Remove the screws. STEP2 STEP1 Careful not to damage the Capacitors ↑Shooting direction: A↑ 8. TUNER/OPTICAL PCB → → → → Proceedingn ： REARnMOLDnPANEL SIDEnPANEL TOPnPANELnASSY CDnMECHAnASSY SHIELDnCASE...

  • Page 20: Main Pcb

    9. MAIN PCB → → → → Proceedingn ： REARnMOLDnPANEL SIDEnPANEL TOPnPANELnASSY CDnMECHAnASSY SHIELDnCASE → MAINnPCB (1) Remove the connector wire. Remove the screws. CN93 CN91 ↑Shooting direction: A↑ 10. SMPS PCB → → → → Proceedingn ： REARnMOLDnPANEL SIDEnPANEL TOPnPANELnASSY CDnMECHAnASSY SHIELDnCASE...

  • Page 21: Front Panel Assy

    11. FRONT PANEL ASSY → → → → Proceedingn ： REARnMOLDnPANEL SIDEnPANEL TOPnPANELnASSY CDnMECHAnASSY SHIELDnCASE → FRONTnPANELnASSY (1) Remove the screws. View from the bottom (2) Remove the connector wire and FFC. Remove the screws. TAPE STYLE PIN CN62 CN63 CN10...

  • Page 22: Special Mode

    SPECIAL MODE Special Mode Configuration Buttons b No. 1 ： In "STANDBY" status, press and hold the "A" and "B" buttons along with the power operation button for at least three seconds. b No. 2 - 6 ： In "STANDBY" status, press and hold the "A" and "B" buttons along with the power operation button to turn on the power.

  • Page 23: Factory Initialization Mode

    1. Factory Initialization Mode Various settings are initialized. See "Initialization Items (Default setting)" for information on the settings that are initial- ized. After initialization, move on to normal mode. Caution Version information (such as rewriting failed log) Clear. Clear the history of protection. "Initial value of laser current"...

  • Page 24: User Initialization Mode

    2. User Initialization Mode Various settings are initialized. See "Initialization Items (Default setting)" for information on the settings that are initial- ized. After initialization, move on to normal mode. Caution There are two differences between this operation and factory initialization •Version information (such as rewriting failed log) not cleared.
  • Page 25 Select the "Version" in the "Setup". "ENTER" q System u-com Version ： The version of the System u-com. "Cursor i " w System u-com (Boot Loader) Version ： The version of the boot loader System u-com. "Cursor i " e Network u-com(Boot Loader) Version ： The version of the boot loader Network u-com.

  • Page 26: Cd Test Mode

    4. CD Test mode 4.1.Operation In "STANDBY" status, press and hold the "CURSOR o " and "VOLUME d " buttons along with the power operation but- ton to turn on the power. Startupndisplay "CD Test Mode" displayed for 5 seconds. CD TEST MODE display(Disk loading) To exit this mode, unplug the power cord.
  • Page 27 r TRACKING ON " 1 / 3 " t READ SUB CODE (playback sound is output) The BER (Block Error Rate) that occurred for one second is displayed. "Cursor o " "Cursor p " "Cursor o " "Cursor p " Inner (IN), Ataru Amane (MID), outer (OUT) to play go to three places, make the error count.
  • Page 28 4.4. All servo on and Auto Adjustment When "Cursor u " button is pressed, all servos turn on, auto adjustment is performed and switch to playback operation. (Playback sound output) Stopn(stopntonthenplaybacknstatenafternautonadjustment)n When "SOURCE" button is pressed, play operation and servo stop. The following will be displayed. After stopping, conduct reading of auto adjust values.

  • Page 29: Protection History Display Mode

    4.6. Accumulated laser on time display When the "Volume f " button is pressed while this Unit is in the "CD TEST MODE "displayed, the accumulated laser on time is displayed. The laser drive times are added and the result is displayed. The time is counted in 10-minute blocks and the count values are displayed in hourly units.
  • Page 30 (c) Speaker short protection Potential difference across the terminal detects that the speaker was more than DC±3V. (d) Over current Over-current detection digital amplifier(TAS5142) (e) DC protect1 Short of fail(+29V[D-AMP power]) (e) DC protect1 Short of fail(+12V, -12V, +5V). Protection history is reset. When the "Cursor u "...

  • Page 31: Procedure After Replacing The Microprocessor, Etc

    PROCEDURE AFTER REPLACING THE MICROPROCESSOR, ETC. The procedure after replacing the u-COM (microprocessor), flash ROM, etc. is as follows. Proce- durenaftern PCBnName Ref.nNo. Description Remark Replace- ment (MAIN) IC28 R5F56108VNFP SOFTWARE: SYSTEM CN66 CY920 MODULE ASSY Be sure to replace the NFC module at the same CN67 time.
  • Page 32 1.3. File structure on USB Memory CopynthenupdatenfilesntonthenUSBnmemorynwithnthenfollowingnstructure:nn USB memory root ModelnName ModelnArea ProductnID Europe (E2) 000200140200 RCD-N9 Japan (JP) 000200140400 + firmwares + 000200XXXXXX + enc_update.xml + IMG.bcd + SBL.bcd + SYS.bin 1.4. Insert the USB memory in the USB port.

  • Page 33: Forced Usb All Device Write Mode

    1.5. Start the update. In "STANDBY" status, press and hold the "CURSOR p " and "INPUT SOURCE" buttons along with the power operation button to turn on the power. 1.6. Display during USB update The following message appears on the display: Display 1.7.
  • Page 34 Personalnnotes：...

  • Page 35: Trouble Shooting

    TROUBLE SHOOTING 1. OLED dosen't light Check Power Supply Voltages for SMPS. Check the following voltages when the unit is connected to the AC power supply. SMPS PCB •[BN93]：1pin Pulse signal of 50 or 60Hz of +4 V(P-P) Replace the SMPS PCB. •[BN93]：11pin +5V •[CN91]：1pin +29V (AMP_VCC) If these voltages are not output, a fault may have occurred in the...

  • Page 36: No Sound, Noise Generated

    2. No Sound, Noise generated 2.1. COMMON(signal) Check Digital Audio Data output from CODEC. MAIN PCB Check the solder and replace any faulty parts. •[IC22]： 17, 18, 19, 20pin •[IC22]：17, 18, 19, 20pin on MAIN PCB DIR_LRCK, DIR_SCLK, DIR_SDATA, DIR_MCLK Check Digital Audio Data input for PWM CONTROLLER.
  • Page 37 2.2. COMMON(POWER Control signal) Check Power Supply Voltages for DIR. Check the solder and replace any faulty parts. MAIN PCB •[Q222]：IN / OUT：+5V_A •[IC22]：46pin +5V_A •[IC27]：IN：+5V / OUT：+3V •[IC22]：22, 36, 42pin +3V_D1 •MAIN PCB OK.? Check Power Supply Voltages for PWM CONTROLLER AMP PCB. MAIN PCB Check the solder and replace any faulty parts.
  • Page 38 Check control signal for DIR. Check the solder and replace any faulty parts. MAIN PCB •[IC28]： 86, 87, 88, 89pin → [IC22]：23, 24, 25, 26pin •[IC22]： 23, 24, 25, 26pin DIR_DO, DIR_DI, DIR_CLK, DIR_CE DIR_DO, DIR_DI, DIR_CLK, DIR_CE Check control signal for PWM CONTROLLER. MAIN PCB Check the solder and replace any faulty parts.
  • Page 39 2.4 . TUNER Check Power Supply Voltages for TUNER. Check the solder and replace any faulty parts. MAIN PCB •[WF15]：6, 7pin A+5V on MAIN PCB •[TM11]：3pin A+5V Check the solder and replace any faulty parts. Check Analog Audio Data output from TUNER PACK. •[C104], [C105] MAIN PCB •[PF15] 8pin TUN_L...
  • Page 40 2.5 . Analog In Check Analog Audio Signal from Analog. Check the solder and replace any faulty parts. MAIN PCB •[JK22] on MAIN PCB •[JK22]：Analog In (L_CH / R_CH) •[IC20]： 7, 4pin：AUX(L/R) Check the solder and replace any faulty parts. 5pin：AIN_CNT1 •[IC61] CNT1 [H](AUX),...
  • Page 41 2.7 . USB / ETHERNET / Wi-Fi Check the solder and replace any faulty parts. Check Power Supply Voltages for Network. Network PCB Network PCB •[CN92]：1, 2, 3pin：+5V_SW •[CN92]：1, 2, 3pin：+5V_SW SMPS PCB •[IC95], [L923]：+5V •[IC97]：IN 1,2,3pin +5V / OUT 6,7,8pin +5V Check the solder and replace any faulty parts.

  • Page 42: Measuring Method And Waveforms

    MEASURING METHOD AND WAVEFORMS To check the waveforms, the GND (-) probe of the oscilloscope to specified reference voltage. (Except for lnner SW, TRVSW) Caution Measuring Disc： CD/TCD-784 CD-R/TCD-R082W CD-RW/TCD-W082W （It is the better way to use an extension wire between the test point and the probe.） •...

  • Page 43: Waveforms

    Symbol Symbol Reference voltage Ⓐ VC： q - i RFEQO DGND： Q3 - Q5 Ⓑ CN93 (7)or(9) MGND： o - Q2 Ⓒ CN82(4) R850 FOC1 R842 TRO1 R843 FMO1 R844 DMO1 CN82(3) OPSW CN82(5) CLSW CN82(2) LOAD+ CN82(1) LOAD- R443 LRCK R444 SCLK...
  • Page 44 4. CD Playback Q3 L RCK Q4 S CLK Q5 S DATA STANDARD GND 5. LOADER OPEN-CLOSE o OPSW Q0 F CLSW Q2 L OAD- Q1 L OAD+ OPEN CLOSE STANDARD GND...
  • Page 45 Personal notes:...

  • Page 46: Block Diagram

    FRONT B'D SWITCHED-MODE POWER SUPPLY TOP KEY B'D DRAN4 Onl RCDN9 Onl NFC Module Power LED Power LED SMSP controller x1 OLED S020-MXS4035A Transformer x1 [DRA-N4] [RCD-N9] White [RCD-N9] White Power Power Cursor Up AC100-230V Input Eject Cursor Down GREEN GREEN...

  • Page 47: Power Diagram

    POWER DIAGRAM DRA-N4 / RCD-N9 POWER BLOCK DIAGRAM Normal operation < 4W Network standby OLED standby < 0.3W Normal standby Audio Power Control Net Power Control OLED Power Control VBUS Power Control SMPS B'D RCD-N9 ONLY +8.0V CD MOTER Regulator...

  • Page 48: Wiring Diagram

    WIRING DIAGRAM AMP PCB TUNER & OPT JACK PCB CUP12675Z CUP12673Z FILTER WF71 6PIN B to B WF70 6PIN B to B CJP06GA300ZB CJP06GA300ZB 3.96 PITCH BN90 2PIN WIRE WF72 12PIN B to B CJP12GA300ZB CN90 2PIN WAFER 3.96 PITCH CJP11GA117ZY BN16 5PIN WIRE(OPT) PF70 6PIN B to B...

  • Page 49: Printed Wiring Boards

    PRINTED WIRING BOARDS Lead-free Solder CD (A SIDE) CD (B SIDE) TUNER DIGITAL (A SIDE) TUNER DIGITAL (B SIDE) When soldering, use the Lead-free Solder (Sn-Ag-Cu). ADJ-1 ADJ-2 DGND C819 R840 C843 IC81 R847 CUP12677Z MP C845 R849 R807 C837 C868 R809 C896...
  • Page 50 10.A+5V C709 11.KEY1 Model Option L708 C706 L709 11.KEY1 12.+16V_OLED 12.+16V_OLED 13.D7 R256 R255 13.D7 WF22 WF23 14.D5 14.D5 15.DGND RCD-N9 15.DGND C723 16.D3 16.D3 C749 DRA-N4 PF12 17.D6 17.D6 18.D1 18.D1 19.D4 Vsesionl Option JW70 19.D4 20.EL_RD 20.EL_RD CWE5202080A...

  • Page 51: Schematic Diagrams (1/6 )

    CD_LDCHK E_VBUS_FLAG1 TU_CE MPIO_B0 DIR_CE 10.PWM_R- R430 MCLK PWM_M_7 DGND MPIO_C3 MODE 9.OTW C220 +5VS R462 18K(1%) OSCRES PWM_P_4 RCD-N9 Only CD_LDCHK MPIO_C2 SDATA R467 8.PWM_R+ SCLK DGND RXIN7:SDATA DVSS2_CORE PWM_M_4 U_PWR1 C203 R321 7.AMP_VCC DGND E_VBUS_CON1 IC28 MPIO_C1 LRCK R368 0.01...

  • Page 52: Sch02_Network

    R643 VBUS LF92 -DATA VBUS CV650050S +DATA IC60 RT9702APB DGND DGND JK90 CJJ8A019Z F901 CN90 DGND T4A H 250V CN63 CHGND LF91 CVA30180J -DATA RCD-N9 Only +DATA SCHEMATIC DIAGRAMS (2/6) DGND SCH02_NETWORK GND LINE POWER+ LINE POWER- LINE ANALOG DIGITAL...

  • Page 53: Sch03_Cd

    TO CD PICKUP C827 0.01 CD DSP PARTS C815 C892 C850 10V/470uF L803 R833 1000P C808 C814 10uH R834 C851 C891 C810 Q800 R835 A1504S 10V/470uF C817 0.01 R836 0.01 C826 C811 C812 C884 C813 GND_DRV GND_DRV 100/10V C852 IC84 CVILM1117C-1V5 C816 0.01...

  • Page 54: Sch04_D-Amp

    EMI CM_0322 16V/100uF 105'C R734 R735 C757 50V/3300uF MODEL OPTION C733 Toshin CAP IC70 MODEL R710 22uF TAS5142DKD C734 22uF DGND RCD-N9 C700 WF70 DRA-N4 GVDD_B C701 0.1 GVDD_A C749 33N(20) R715 BST_A C737 L708 R707 3216, 10uF/50V DGND PVDD_A...

  • Page 55: Sch05-Front

    TO PF12 WF11 KEY&NFC FRONT WF11 CJP27GB116ZY R111 R110 CUP12673Z-1 Q108 RT1P141C WF14 RC11 CJP04GB113ZY CRVKSM603TH5B PF13 CJP05GB113ZY NFC_ACK FFC TYPE NFC_ACK DGND KEY3 DGND R109 R108 R107 R106 KEY2 DGND DGND_1 DGND R115 R122 DGND R131 R132 R133 WF13 DGND_1 CJP05GB113ZY L113...

  • Page 56: Sch06-Smps

    D939 IC93 Q933 7812A 2SA2167ES L927 L929 PT91 +16V_OLED CN91 0 ohm CLZ9R001Z CLZ9R001Z [2.5 MM] AMP_VCCA AMP_VCC R951 AMP_VCCA AMP_VCC DGND DGND AMP_VCCA AMP_VCC L921 BD98 C922 HS92 For D925 HEAT SINK 1KV 471 J 100MHz_60ohm_5A DGND DGND 100MHz_60ohm_5A TH91 BD99 L924...

  • Page 57: Exploded View

    EXPLODED VIEW Please see the last chapter for the part list. WARNING: Parts marked with this symbol z have critical characteristics. Use ONLY replacement parts recommended by the manufacturer.

  • Page 58: Packing View

    PACKING VIEW Please see the last chapter for the part list. MANUAL ASSY 17-2 17-3 17-4 17-1 17-2 17-3 17-4 17-1 UK plug (UK Only)

  • Page 59: Semiconductors

    SEMICONDUCTORS Only major semiconductors are shown, general semiconductors etc. are omitted to list. The semiconductor which described a detailed drawing in a schematic diagram are omitted to list. 1. IC's R5F56108VNFP (MAIN : IC28)
  • Page 60 R5F56108VNFP (MAIN : IC28) Terminal Function STANDBY MODE Port Name PD/PU Note TIMER Network OLED OLED+NW STBY STBY STBY STBY STBY 1 TDI Emulator Connection terminal 2 TMS Emulator Connection terminal 3 TEST1 Boot for Check PCB mode 4 OPEN OPEN 5 AVSS 6 TRST#...
  • Page 61 STANDBY MODE Port Name PD/PU Note TIMER Network OLED OLED+NW STBY STBY STBY STBY STBY 62 SP_PROTECT DC Power Detect (SPK OUT) +1V2_NET_P_ Power Control for CY920_+1.2V CONT 64 OPEN OPEN 65 TEST2 Boot for Check PCB mode 66 OPEN OPEN PD(DIR_ 67 DIR_INT...
  • Page 62 STANDBY MODE Port Name PD/PU Note TIMER Network OLED OLED+NW STBY STBY STBY STBY STBY 118 DRVMUTE PU_OPEN CD Driver Mute (H: Mute Off, L: Mute On) 119 CD_OPEN Open CD Tray 120 CD_CLOSE Close CD Tray 121 VBUS_FLUG1 Check VBUS Voltage 1 (Front USB), L : Error 122 OPEN OPEN 123 LD_CHK...
  • Page 63 Pin Layout (Top View) TC94A92FG (CD : IC83) VDD3 CDMoN3 BUS0 Pio14/CDMoN2 BUS1 Pio13/CDMoN1 BUS2 Pio12/CDMoN0/FGiN BUS3 Pio11 BUCK Pio10 /CCE Pio9 TC94A92FG Pio8 /RST VDD1-3 (Top View) TEST VDD1-1 FMoS VSS-1 /SRAMSTB VSS-3 VDDM1 TMAX AVDD3 LPFN LPFo RFRP PVREF RFZi VCoF...
  • Page 64 TC94A92FG Terminal Function Symbol Description Default Remarks DSP VCO - EFM and PLCK Phase difference VCoi signal output pin. 3 state output 3AI/F (DSP VCO control voltage inputr pin.) CD-DSP-Power supply for 3.3V RF RVDD3 amplifier core and PLL circuit Connect capacitor according with se SLCo EFM slice level output pin...
  • Page 65 Symbol Description Default Remarks CMOS Port Pio8 Port 8(General Input/Output Port ) Schmitt input 3I/F Refer to [1.2 Pin Assinment Table] CMOS Port Pio9 Port 9(General Input/Output Port ) Schmitt input 3I/F Refer to [1.2 Pin Assinment Table] CMOS Port Pio10 Port 10(General Input/Output Port ) Schmitt input...
  • Page 66 Symbol Description Default Remarks CMOS Port BUS1 Microprocessor I/F data input/output pin 1 Schmitt input 3I/F Refer to [1.2 Pin Assinment Table] CMOS Port BUS2 Microprocessor I/F data input/output pin 2 Schmitt input 3I/F Refer to [1.2 Pin Assinment Table] CMOS Port BUS3 Microprocessor I/F data input/output pin 3...
  • Page 67 The IP4001 is a monolithic integrated circuit, and 5-CH MOTOR DRIVE IC suitable for 5-ch motor driver which drives focus actuator, tracking actuator, sled motor, spindle motor and Tray motor of CDP & V-CD system. PIN CONNECTIONS IP4001CR (CD : IC81) 28SSOP H/S (FIN) PGND2...
  • Page 68 www.ti.com SBAS495 – JUNE 2010 PIN CONFIGURATIONS PT PACKAGE LQFP-48 PCM9211 (MAIN : IC22) (TOP VIEW) ERROR/INT0 VDDRX NPCM/INT1 RXIN1 MPIO_A0 MPIO_A1 RXIN2 MPIO_A2 RXIN3 MPIO_A3 RXIN4/ASCKIO PCM9211 MPIO_C0 RXIN5/ABCKIO MPIO_C1 RXIN6/ALRCKIO MPIO_C2 RXIN7/ADIN0 MPIO_C3 MODE MPIO_B0 MS/ADR1 MPIO_B1 MC/SCL PCM9211 www.ti.com SBAS495 –...
  • Page 69 PCM9211 Pin Discriptions DESCRIPTION NAME TOLERANT ERROR/INT0 DIR Error detection output / Interrupt0 output NPCM/INT1 DIR Non-PCM detection output / Interrupt1 output MPIO_A0 Multipurpose I/O, Group A(1) MPIO_A1 Multipurpose I/O, Group A(1) MPIO_A2 Multipurpose I/O, Group A(1) MPIO_A3 Multipurpose I/O, Group A(1) MPIO_C0 Multipurpose I/O, Group C(1) MPIO_C1...
  • Page 70 NJM2752 NJM2752 (MAIN : IC20) TVSP10 SSOP14 NJM2752V NJM2752RB2 NJM2752 OUTB OUTA OUTB OUTA IN1A IN1B IN1A IN1B IN2A IN2B IN2A IN2B CNT1 CNT1 Vref Vref PIN.No. SYMBOL FUNCTION PIN.No. SYMBOL FUNCTION OUTA Ach Output Terminal Vref Reference Terminal IN1A Ach Input Terminal1 IN2B Bch Input Terminal2...
  • Page 71 The TAS5142 is available in two thermally enhanced packages: • 36-pin PSOP3 package (DKD) • 44-pin HTSSOP PowerPad™ package (DDV) Both package types contain a heat slug that is located on the top side of the device for convenient therma coupling to the heatsink.
  • Page 72 TAS5142 www.ti.com SLES126B – DECEMBER 2004 – REVISED MAY 2005 FUNCTIONAL BLOCK DIAGRAM TAS5142 Block Diagram Under- voltage Protection Internal Pullup VREG VREG Resistors to VREG Power Reset AGND Protection I/O Logic Temp. Sense RESET_AB Overload RESET_CD OC_ADJ sense Protection GVDD_D BST_D PVDD_D...
  • Page 73 SLES273A – APRIL 2013 – REVISED JUNE 2013 www.ti.com Device Information Physical Characteristics 2.1.1 TAS5558 Pin Assignments TAS5558 (MAIN : IC23) DCA Package (Top View) PWM_HPM_L PWM_P_6 PWM_HPP_L PWM_M_6 PWM_HPM_R PWM_P_5 PWM_M_5 PWM_HPP_R VR_PWM AVSS PLL_FLTM AVSS_PWM PLL_FLTP AVDD_PWM VR_ANA PWM_P_8 PWM_M_8 AVDD...
  • Page 74 SLES273A – APRIL 2013 – REVISED JUNE 2013 www.ti.com These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates. Block Diagram TAS5558 Block Diagram Fixed Flow...
  • Page 75 Part Number Package Markings Temp Rating (°C) Package Description EN5339QI EN5339 -40 to +85 24-pin (4mm x 6mm x 1.1mm) QFN T&R PGND AGND EVB-EN5339QI EN5339 QFN Evaluation Board PGND Packing and Marking Information: www.altera.com/support/reliability/packing/rel-packing-and-marking.html PGND PGND Pin Assignments (Top View) Keep-Out EN5339QI (NETWORK : IC63, IC64, IC65, IC66) VOUT...
  • Page 76 MX25L25635FMI (NETWORK : IC67) MX25L25635FMI Pin Discriptions MX25L25635FMI Block Diagram...
  • Page 77 TC7USB40MU (NETWORK : IC62) TC7USB40MU Block Diagram...
  • Page 78 TPC6111 (NETWORK : Q681) TPC6111 Pin Discriptions...
  • Page 79 CS (Current Sense) The Current Sense pin senses the on the series resistor inserted in Package PG-DSO-8 Power MOSFET. If CS reaches the of the Current Limit Comparator, th ICE3BS03LJG (SMPS : IC91) immediately switched off. Furtherm information can be used to realize operation through the PWM-Com compares with FB signal.
  • Page 80 Pin Assignments & Functions Pin Assignments & Functions NR111E (SMPS : IC95) Pin Assignments Pin Assignments Pin Functions NR111E Pin Discriptions Pin Functions i r c i r c High-side Boost input. High-side Boost input. BS supplies the drive for High-side Nch-MOSFET switch. BS supplies the drive for High-side Nch-MOSFET switch.

  • Page 81: Display

    *1：アクティブエリア　Active Area 31.0 2. DISPLAY 59.3 ummary ◆I/Oインターフェース I/O Interfaces S020-MXS4035A-3 (FRONT : WF12) 単位 仕様 端子番号 端子名 入出力 機能 Unit Specification Function Pin No. Pin Name OLEDディスプレイユニット グランド GND OLED Display Unit ドライブ系電源電圧 Drive System Power Voltage 陰極電源 Power Supply for Cathode Driver ドットマトリクス...
  • Page 82 FRONT FRONT PCB ASS'Y ※Parts indicated by "nsp"on this table cannot be supplied. ※The parts listed below are only for maintenance. Therefore they might differ from the parts used in the unit in appearances or dimensions. NOTE:The symbols in the column Remarks indicate the following destinations. E3 : U.S.A.
  • Page 83 FRONT REF No. Part No. Part Name Remarks Q'ty New Ver TM11 943183100540D TUNER(USA/JAPAN) ,FM(SCREW : F TYPE), AM (S/LAB) CNVMW004MV1S63 WF11 WAFER, FFC(27P-1.25mm, ANGLE) CJP27GB116ZY WF12 WAFER, FPC/FFC(30P, 1mm PITCH, ANGLE) CJP30GB305ZN WF13 WAFER, FFC(5P-1mm, ANGLE) CJP05GB113ZY WF14 WAFER, FFC(4P-1mm, ANGLE) CJP04GB113ZY WF15 WAFER, FFC(11P-1mm, STRAIGHT)
  • Page 84 943239101500S I.C , EEPROM(128KBIT,SOP-8P) CVIR1EX24128BSAS 1 IC27 943239101610D I.C, REGULATOR(3.3V, TO-252-5, Io=1.5A, LDO) CVINJM2857DL3-33 IC28 I.C ,CPU(2M/PLQP0144KA-A) CVIR5F56108VNFP ┗IC28 943243102690S I.C,MAIN MCU(DRA-N4,RCD-N9),2M/PLQP0144KA-A CVIANAM2033CR IC29 943239010400S I.C, REGULATOR(3.3V/TO-252) CVINJM2845DL133 IC60 943239001120S IC , CURRENT LIMITER CVIRT9702APB IC61 23671011050AS I.C , IPOD AUTHENTICATION FROM D&M...
  • Page 85 MAIN REF No. Part No. Part Name Remarks Q'ty New Ver R408 RES, CHIP(1005/5%/1Kohm) CRJ06IJ102T R409 RES, CHIP(1608/5%/1Kohm) CRJ10DJ102T R410-416 RES, CHIP(1608/5%/4.7Kohm) CRJ10DJ472T R417-420 RES, CHIP(1608/5%/3.3Kohm) CRJ10DJ332T R421,422 RES, CHIP(1608/5%/4.7Kohm) CRJ10DJ472T R423,424 RES, CHIP(1608/5%/470ohm) CRJ10DJ471T R425-431 RES, CHIP(1608/5%/47ohm) CRJ10DJ470T R432 RES, CHIP(1608/5%/10Kohm) CRJ10DJ103T R433-436...
  • Page 86 MAIN REF No. Part No. Part Name Remarks Q'ty New Ver C365 CAP, CHIP(1005, 16V/0.1uF, X7R)_SAMSUNG CCUI1C104KCS C366-368 CAP, CHIP(1608, 50V/0.1uF, X7R)_SAMSUNG CCUS1H104KCS C369 RES, CHIP(1608/5%/0ohm) CRJ10DJ0R0T C370-372 CAP, CHIP(1608, 50V/0.1uF, X7R)_SAMSUNG CCUS1H104KCS C373 CAP, CHIP(2012, 16V/10uF, X5R)_SAMSUNG CCUC1C106KCS C374 943134503400D CAP, ELECT(50V/2.2uF)-S CCEA1HKS2R2T...
  • Page 87 MAIN REF No. Part No. Part Name Remarks Q'ty New Ver CN92 LOCK-WAFER/ANGLE/2.5MM PITCH/5PIN CJP05GJ289ZY CN93 LOCKING TYPE , STRAIGHT WAFER , 2MM CJP13GI236ZW ! CX91 943134503220D CAP , X2(275VAC, 0.22uF, 12mm, SEORYONG) CCQF2E224KZFS ET20,21 PLATE , EARTH(TRONIC ELECTRONICS) CJT1A026 ！...
  • Page 88 DAMP DAMP PCB ASS'Y ※Parts indicated by "nsp"on this table cannot be supplied. ※The parts listed below are only for maintenance. Therefore they might differ from the parts used in the unit in appearances or dimensions NOTE:The symbols in the column Remarks indicate the following destinations. E3 : U.S.A.
  • Page 89 CD PCB ASS'Y ※Parts indicated by "nsp"on this table cannot be supplied. ※The parts listed below are only for maintenance. Therefore they might differ from the parts used in the unit in appearances or dimensions NOTE:The symbols in the column Remarks indicate the following destinations. E3 : U.S.A.
  • Page 90 SP : Premium Silver model WT : White model REF No. Part No. Part Name Remarks Q'ty New Ver 943639101980D RCD-N9 SMPS PCB ASSY COP12676B 943639101990D RCD-N9 SMPS PCB ASSY COP12676C RCD-N9 DAMP PCB ASSY COP12675B RCD-N9 MAIN PCB ASSY COP12674B ┣C22...
  • Page 91 CSA1A044Z BAG , ZIPPER POLY(A5) CPB1A227Z 943533102850D CUSHION BOTTOM CPS1A1005 BATTERY , AAA 2PCS IN PACK CABR03PPB 30701021000AD REMOCON TRANSMITER ASS'Y (RCD-N9 BK Ver.) CARTRCDN9BK 30701021100AD REMOCON TRANSMITER ASS'Y (RCD-N9 WT Ver.) CARTRCDN9WT 943531104650D BOX, OUT CARTON EUROPE CPG1A1034Z 943531104870D...

This manual is also suitable for:

Dra-n4

Table of Contents

Save PDF