Advertisement
Display
q Files Not Found :
(## : error code)
w Connection Fail. :
(## : error code)
e Updat Fail :
(## : error code)
7. USB μCom version up mode
7.1. When start update mode
Only 1 / 3 button (when e is displayed) and ON/STANDBY button are available.
To exit the mode (quit updating), unplug AC cord or press ON/STANDBY button.
Insert the USB memory in which firmware is written into USB1 jack.
Display
q During loading USB memory :
w When USB memory is not connected. :
When USB Memory is inserted at this status, status changes to 7.1 q → e .
e When USB memory is connected and Update file is detected. :
# #
# #
# #
25
Advertisement
