Wi-Fi And App Operation; Cleaning And Maintenance - Hornbach 10530794 Operating Manual

Thermostat
1. If you press the + or - keys the temperature setting will flash five times.
2. While the temperature is flashing, you can adjust the temperature setting by pressing the + or -
keys. The temperature will increase (+) or decrease (-) by one degree each time a key is pressed.
3. The appliance will keep the temperature setting by automatically switching itself on and off.
4. The display will automatically switch off if no setting changes are made for 10 seconds. You can
reactivate it by pressing any button once.
5. Press the ON/OFF button first in order to switch off the appliance. The heater is now set to
standby mode. Now switch off the main switch (O); the red lamp will go out. Finally unplug the
appliance.
Timer
The appliance is equipped with a timer function that can be operated with an app.

Wi-Fi and app operation

The heating panel can also be controlled with an app. To do this, the heater
must be connected with the Wi-Fi network. To download the app, either scan the
following QR code or search for 'Tuya Smart' in the App Store or Google Play
and follow the download instructions.
Safety and remote control
It is easy for you to operate your heating panel online.
This makes it possible for you to operate the heater remotely without any direct supervision.
Please know that even when operating the heater remotely, all safety precautions stated in the
supplied user manual must be observed. Read and understand these safety precautions and
make sure that all safety precautions are also taken with remote operation.

Cleaning and maintenance

Keep the heating panel clean. Before cleaning or performing maintenance, switch the appliance
off, remove the plug from the socket and allow to cool.
Clean the outside of the heating panel regularly with a dry or very slightly moistened cloth. Do not
use any abrasive soap, spray, detergents or scouring agents, wax, glazing agents or other
chemical solutions. Dust can be removed from the rear of the appliance with a duster. To clean
the back of the appliance thoroughly, unscrew the heating panel from the wall.
Activities at the start of the season
Verify that the heating panel, power supply cable and power socket are in order and that they are
not damaged.
Follow the installation and safety instructions carefully.
152