How To Operate The Portable Audio Player; Switching The Aux Mode On And Off; When Using Aux - Toyota TNS400 Owner's Manual

9. How to operate the portable audio
player
Use an optional AUX cable to connect a portable audio player to the main unit.

9.. Switching the AUX mode on and off

1. Press the [SOURCE/PWR] button for more than one second to turn the audio mode OFF.
"AUDIO OFF" is displayed on the TomTom display. On the sub display "GOOD BYE" will be
momentarily displayed and then "ALL OFF".
2. Press the [TP/TEXT] button and [FUNC/AF] button simultaneously for longer than
3 seconds.
AUX ON ↔ AUX OFF
Attention:
• When AUX is set to ON ("AUX ON"), the AUX mode is established by pressing the [SOURCE/
PWR] button. When AUX is set to OFF ("AUX OFF"), the AUX mode is not established by
pressing the [SOURCE/PWR] button.
• The [SOURCE/PWR] button must be off prior to using this feature. (Press [SOURCE/ PWR]
button for more than one second - "GOOD BYE" will momentarily be displayed.)

9.. When using AUX

1. Turn on the power to the connected portable audio player.
2. Press the [SOURCE/PWR] button to switch to the AUX mode.
The sound from the connected portable audio player will be output.
Attention:
• While the AUX mode is activated, actions such as turning off the audio player or pulling out
the connection cable may cause noise spikes that can damage the system speakers. Be sure to
avoid this possibility by turning off the system power or switching from AUX mode to another
mode before shutting off or disconnecting the portable audio player.
• Audio output levels will differ among the various devices that can be connected by this
method. Carefully adjust the volume until the output level of the connected player is known.
• Before using a portable audio player in a vehicle, read the player's operation manual carefully
and confirm problem-free operation in the vehicle before proceeding.
• When you connect an optional AUX cable to the main unit, it is not possible to connect any
other optional equipment.
TNS400 47