Scan Tracks; Scan Files/Folders; 4. Returning To The Root Directory - Toyota TNS400 Owner's Manual

6.. Scan tracks

1. Press the [FUNC/AF] button while a CD track is being played to switch to SCAN on the
sub display.
2. Press the [ENTER] button.
The main unit will play the first 0 seconds of each track.

6.. Scan files/folders

1. Press the [FUNC/AF] button while an MP3/WMA file is playing to switch to SCAN on the
sub display.
2. Press the [SELECT (Right/Left)] button to select the scan setting.
Press the [SELECT(Right/Left)] button to switch the mode in the following sequence:
Right: SCAN ALL
Left: SCAN ONE
3. Press the [ENTER] button.
SCAN ALL... Play the first ten seconds of the first file in each folder.
SCAN ONE... Sequentially play the first ten seconds of all files in the folder being played and all
files beneath it in the hierarchy.
Attention:
• To continue playing a desired track/file, turn the scan function OFF.
• After the entire disc has been scanned once, ordinary playback starts from the point where
scanning started.
• During random playback, select REPEAT to repeat the track/file being played. To cancel repeat
play (go back to random play), turn the REPEAT function OFF.
• Occasionally the same track/file will be played two or more times in a row ; this is normal
operation and is not a sign of a problem.
• When any of the functions - "Playing the Start of Tracks/Files", "Repeated Playing" and
"Playing the Tracks/Files in Random Order" - is selected, a message such as "SCAN", "ALL
SCAN", "REPEAT", "ALL RPT", "RANDOM" or "ALL RAND" appears on the display to verify the
current function.

6.4. Returning to the root directory

Press the [SELECT (Upper/Lower)] button (lower part) for longer than one second while an
MP3/WMA file is playing.
6 TNS400