Toyota TNS400 Owner's Manual page 33

Converting CD music to MP3/WMA files
Prepare a computer with commercially available MP/WMA encoding software (conversion
software). Some encoding programs available on the Internet do not require payment. Music data
files in the MP/WMA format can be made by inserting the music CD into the CD-ROM drive of
the computer and following the procedures of the MP/WMA encoding software to compress
the songs of the music CD. A  cm music CD (having a maximum of 74 minutes of recording/
650 MB of data) can normally be compressed to approx. 65 MB (about /0 of the original size).
Writing to a CD-R/CD-RW
MP/WMA files can be recorded on CD-R/RW by using a CD-R/RW drive connected to a computer.
Record by setting the recording format of the recording software to ISO9660 level  or level  (not
including the extension format).
Select CD-ROM ( mode ) or CD-ROM XA ( mode ) for the disc format.
Playing back a CD-R/RW
Insert a CD-R/RW disc with MP/WMA files recorded on it. The system will automatically determine
whether the disc is a music CD or a CD-R/RW with MP/WMA files and begin playing the disc.
A music CD recorded onto a CD-R/RW can also be played. However, depending on the type, some
discs may not play.
Attention:
• A fixed bit rate of 8 kbps and sampling frequency of 44. kHz is recommended for obtaining
stable audio quality at playback.
• Depending on the characteristics of the disc, CD-R and CD-RW may not be playable.
• Because there are many types of MP/WMA encoding software available, including commercial
and freeware programs, the audio quality may deteriorate, noise may be generated when
playing starts and some recordings may not play, depending on the condition of the encoder
and the file format.
• When files other than MP/WMA files are recorded on a disc, the system may take some time
to recognize the disc and it may not play it.
 TNS400