Advertisement
For Windows 98 users:
1.) Insert Kanguru Drivers CD into your computer, and open the Kanguru Wizard
folder.
2.) Then open the Drivers folder and double-click the Setup.exe icon to run the
installation program.
3.) Follow the installation wizard to complete the setup. You may have to reboot
your computer to complete the installation.
4.) Insert your Kanguru Wizard and you will have access to it as a Removable Drive
in My Computer.
If you do not find the new drive in My Computer, please do the following:
• Right click on My Computer and select Properties.
• Select the Device Manager tab and you will find a Kanguru Wizard device with
a yellow exclamation point next to it.
• Double click on this, and then click Reinstall or Update Driver.
• Select the option of having Windows search for a better driver
• Click Next until the systems prompts "Please insert the disk labeled 'USB Driver
Disk', and then click OK"
• Windows will then ask for a PUDKPDRV.PDR file
• Click Browse, and then direct Windows to the Kanguru Wizard folder where this
file is located. Click OK and Windows will finish the installation
• After this you can click on My Computer and you should see the device there, as
a removable disk.
(You are now all done!)
4.)Wizard Installation Procedure:
1. Plug the Wizard into your USB port and open the removable disk drive that
appears under "My Computer".
2. Open the "Kanguru Wizard" folder on the drive.
3. Double click on "Setup.exe" to begin the installation.
4. Follow the installation wizard to complete the installation.
5. After the installation has finished you can create a "secret" drive by going to your
Start menu, selecting Kanguru Wizard, and then "Create Virtual Disk".
6. Follow the onscreen instructions to create the virtual disk.
7. After your system has rebooted you will find the virtual disk under "My
Computer"
8. For detailed instructions please refer to the HTML help file "FSVF.CHM"
located in the Kanguru Wizard folder on the drive.
Advertisement
