Download Print this page

Kanguru Wizard User Manual page 2

Kanguru wizard usb flash drive: users manual

Advertisement

Table of Contents:
ANGURUMICRO DRIVE
Introduction ...................................................................................................1
Features & Specifications ................................................................................2
Hardware Installation Procedure ....................................................................... 3
Wizard Installation Procedure .......................................................................... 4
1.) Introduction:
Thank you for purchasing the Kanguru Wizard from Kanguru Solutions! The Kanguru
Wizard is a palm sized USB Security Key, which enables a user to portion off and secure
sections of any existing hard drive by creating a second "virtual" drive. This virtual drive
is only accessible when the Wizard is plugged into your computers USB port.
Unplug the Wizard and the new drive becomes invisible and inaccessible to anyone
attempting to access your computer. You can use the Kanguru Wizard as key to protect
valuable information on your internal hard drive.
2.) Features & Specifications:
• Hot Plug & Play - Enables you to insert/remove the Wizard at anytime.
• Uses high-grade Toshiba & Samsung NAND flash memory.
• Supports USB 1.1 specifications.
• Transferring rate up to 12Mbit per second at "Full Speed". (USB Flash Drive)
• Supports a power saving mode to reduce power consumption while using Wizard in any
mobile devices.
• Supported by Windows 2000, ME, XP without a driver.
• LED indicator for data transfer.
• Write/Delete protection switch.
• Durable solid-state storage - data retention of at least 10 years.
• No external power is required - DC 4.5V ~ 5.5V from USB port.
• Low Power consumption: Write 39.1mA ~ 39.4mA Read 35.0mA ~ 36.1mA.
• Dimension: (LxWxH) 75mm x 23mm x 11mm
• Weight: 18g
3.)Hardware Installation Procedure:
The Kanguru Wizard ONLY requires drivers for Windows 98. On any of the other
operating systems (Win 2000/ME/XP) the drivers are built in, so you don't have to install
anything. Simply plug the drive into an available USB port to gain access the drive. It
will automatically appear as a drive in your "My Computer" icon.
NOTE: These instructions are for installing the USB Flash Drive drivers on Windows
98, not the actual WIZARD program. Please refer to the Wizard Installation section for
further instructions.

Advertisement

loading