Kanguru BioSTOR User Manual page 8

Kanguru BioSTOR
4. You will then see you registered fingerprints turn pink.
5. You will then be prompted to place your finger on the sensor to capture
you fingerprint. The sensor 3.5" version of the BioSTOR is located under
the front panel with the "BioSTOR" logo. To access the sensor, simple
slide this panel up. You will need to repeat this process until enough data
is gathered for an accurate reading of your fingerprint.
6. If you would like to use the option backup password function, then please
select the "Enable Rescue Password" option and enter a password. Press
Exit or Enter on your keyboard to finish.
You should now have at least one registered fingerprint and you can begin
using the drive.
- 8 -