Maintenance; Storage; Troubleshooting; Technical Data - Gardena 19000 Operator's Manual

Smart gateway
Hide thumbs Also See for 19000:
Table of Contents

Advertisement

Factory Reset:
7

5. MAINTENANCE

To clean the Gateway:

6. STORAGE

To put into storage:
Disposal:
(in accordance with
RL2012/19/EC):

7. TROUBLESHOOTING

For any other malfunctions please contact the GARDENA service department.
Repairs must only be done by GARDENA service departments or specialist dealers
approved by GARDENA.

8. TECHNICAL DATA

Operation temperature range
(indoors):
Internal SRD:
Frequency range
Maximum power
Free field radio range
External antennas
Wi-Fi
Frequency range
Maximum power
Standards supported
6
The smart Gateway will be reset to the factory settings.
1. Disconnect the Gateway from the network.
2. Press and hold down the Reset key
the network and wait until the Power-LED lights up yellow.
3. Release the Reset key
green.
No caustic / abrasive cleaning agents should be used.
v Clean Gateway with a damp cloth (do not use solvent).
The unit must be stowed away from children.
v Do not stow the unit outdoors if not in use.
The unit must not be added to usual household waste.
Refer to local environmental laws for discarding.
v Important: Make sure that the unit is discarded through your
municipal recycling collection centre.
smart Gateway
(Art. 19000-20)
0 °C – 40 °C
863 – 870 MHz
25 mW
approx. 100 m
only optional
2400 – 2483,5 MHz
100 mW
IEEE 802.11b/g/n
(7)
; connect the Gateway to
(7)
and wait until the Power-LED lights up

Advertisement

Table of Contents
loading

Table of Contents