Table of Contents
Advertisement
Protect the power supply unit from moisture when
connected.
The unit can be used in the temperature range
0 °C – + 40 °C.
Don't use cables – connecting the products to
external / outdoor interfaces.
2. FUNCTION
LED-Display:
Power-LED
Connection-LED
Internet-LED
3. INITIAL OPERATION
Contents:
To mount on the wall:
Short Range Device Antennas and WLAN Antenna
are installed in the unit.
External Short Range Device Antennas is optional
available.
Do not use in cellar or nearby metal plates or
engines.
(1)
Internet-LED:
Green: Connected with router and VPN
Yellow: Hotspot mode – not connected with router
Yellow flashing: Connected to mobile phone
Red: Not connected
Red flashing: Connected with router; not connected with VPN
(2)
Connection-LED:
Green flashing: Receiving data
Yellow flashing: Sending data
3
Power-LED:
Green: Power On
Green flashing: Booting
Yellow: 1. Factory reset running
2. Error (restart required)
Yellow flashing: Software update
Red: Fatal error (restart required)
– Gateway unit
– Netzteil
– Ethernet-cable
The two screws (not supplied) for attaching the Gateway have to
be screwed into place A horizontally 75 mm / B vertically 50 mm apart
and the screw head diameter must not exceed 8 mm.
A
75 mm
1. Screw the screws into the wall A 75 mm / B 50 mm apart.
2. Attach the unit.
B
50 mm
3
Advertisement
Table of Contents
