LG LREL6325 Series Owner's Manual page 28

NOTE
HI is the highest temperature available.
LO is the lowest temperature available.
Turning on the Dual Element
There is one dual element located in the left front position.
Use the dual element as a dual or single element.
1
Push in the appropriate knob.
2-A
Turn the knob counterclockwise to use it as
a Single element.
2-B
Turn the knob clockwise to use it as a Dual
unit.
Heating with inner
(smaller) element only
Turning on a Triple Element (on some models)
There is one triple element that can be used as either
a single, dual or triple element.
1
Push in the appropriate knob.
2-A
Turn the knob counterclockwise to use the
Single element.
2-B
Turn the knob clockwise to the Dual position
to use as a Dual element.
2-C
Turn the knob clockwise to the Triple
position to use as a Triple element.
Single Dual
Turning on the Warming Zone
FOOD POISON HAZARD: Bacteria may grow in
food at temperatures below 140 °F.
The Warming Zone, located in the back center of the
glass surface, will keep hot, cooked food at serving
temperature. Use the Warming Zone to keep food
warm after it has already been cooked. Attempting
to cook uncooked or cold food on the Warming Zone
could result in a food-borne illness.
1
2
Heating with both
elements together
3
Triple
CAUTION
Always start with hot food. Do not use the warm
setting to heat cold food.
Do not use the warm setting for more than 2
hours.
Always use pot holders or oven mitts when
removing f ood from the center warming element.
Press the COOKTOP Set/Off button. The
Model LREL6325*
Use the Level buttons to adjust the temperature
settings. The temperature settings are adjustable
at all times.
Model LREL6323* / LREL6321*
Use the – / + buttons to adjust the temperature
settings. The temperature settings are adjustable
at all times.
button once.
NOTE
For best results, food on the warmer should
be kept in its container or covered with a lid or
aluminum foil to maintain food quality.
The warmer will not glow red like the other
cooking elements.
The Warming Zone can be operated as a single
element on some models.
OPERATION 27
Set/Off