fantastic furniture Eden Manual page 7

Step 5
You will need
3 x CR Runner
Tracks (H8)
12 x Small Phillips Head
Screws (H5) Screwdriver
Use the holes shown below on the
Slide Track (H6-1) to secure the screws.
Secure 1 x Slide Track (H6-1) and 3 x CR Runner Tracks (H8) to Right Side Panel (P4) with 12 x
Small Screws (H5) by tightening with the Phillips Head Screwdriver.
Step 6
You will need
3 x Dowels
3 x Cam Nuts
(H1)
(H4)
Phillips Head
Screwdriver
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
Insert 3 x Dowels (H1) into Left Side Panel (P3).
Insert 3 x Cam Nuts (H4) into Rails (P6, P7, P8).
Rotate the nuts so the arrows point towards
the incoming bolts. Attach Rails (P6, P7, P8) to Left
Side Panel (P3) by tightening all nuts with the Phillips Head Screwdriver.
fantasticfurniture.com.au
(P4)
(P6)
(P8)
CR
(P7)
(P3)
Page 7