fantastic furniture Eden Manual page 5

Step 1
You will need
7 x Cam Bolts Phillips Head
(H3) Screwdriver
Attach 7 x Cam Bolts (H3) to Left Side Panel (P3) as shown by tightening with the Phillips
Head Screwdriver.
Step 2
You will need
2 x Slides
(H6)
fantasticfurniture.com.au
(P3)
Separate 2 x Slide (H6) into Slide Tracks (H6-1) and Slide Runners (H6-2)
as shown below:
Press down on the plastic release lever to extend the
Slide Runner (H6-2) from Slide Track (H6-1) and then
separate the two pieces completely.
Adjust Runner to access the screw holes.
Page 5