Table of Contents
Advertisement
Connecting the ProLine element
Connect the ProLine element(s) to the
domestic power supply and to the
gas supply (see "Installation" – "Elec-
trical connection" and "Gas connec-
tion").
Checking for proper function
After installing the appliance, ignite all
burners to check that they are operat-
ing correctly:
- The flame must not go out on the
lowest setting, or when the knob is
turned quickly from the highest to the
lowest setting.
- On the highest setting, the flame
must have a distinctive and visible
core.
Removing a ProLine element
If the ProLine element is accessible
from below, push it up to remove it.
Push the back of the appliance out
first.
If the ProLine element is not accessi-
ble from below, take hold of it with
both hands at the back, pull it for-
ward, then lift it up and out.
Installation
45
Advertisement
Table of Contents
