SD37_TW_EN.book Page 17 Thursday, June 19, 2008 3:20 PM
Connecting the headset audio output
This display provides a stereo headset output socket for delivering the audio signal
to a stereo headset.
Connect the stereo headset plug (3.5mm Mini-jack type) to the stereo headset
output socket on the display using a suitable audio cable.
Once connected, the display speakers will be muted automatically. The volume
level can be adjusted by pressing the VOL (Volume) + and - buttons on the
display.
Avoid prolonged use of the headset or listening in an excessive volume level,
otherwise your hearing will be damaged.
Headset
Section 1: Quick Start Guide
17