SD37_TW_EN.book Page 11 Thursday, June 19, 2008 3:20 PM
Connecting the S-Video input
DVD player
1. Connect the S-Video output of your output equipment (like a DVD player) to the
display's AV2 S-VIDEO terminal using an S-Video cable (not provided). Pay
attention to the alignment of the plugs on the S-Video cable when inserting so as
not to damage any pins.
2. Connect the S-Video audio output of the output equipment to the AV2 AUDIO L
(white)/R (red) input terminals using a suitable RCA type audio cable (not
provided).
To view video image from this input, press
You should not connect both a composite Video and an S-Video from the same
device; just one or the other. If you have the choice, use the S-Video instead of
composite Video as an S-video signal provides a higher quality signal to that of
composite Video.
S-Video cable
Audio cable
INPUT
and select
AV2-S.
Section 1: Quick Start Guide
11