Connecting The Stereo Audio Output; Connecting The Headset Audio Output - BenQ VB2621 Quick Start Manual

Connecting the stereo audio output

This display provides a set of stereo audio
output terminals (RCA type) for delivering the
audio signal to a sound system or other audio
devices.
1. Connect the audio input terminals of an
amplifier or other audio device to the
AUDIO OUTPUT L/R terminals on the
display using a suitable RCA type audio
cable.
2. Set the
Speaker Out
menu to .
Off
This output is always available. Its level is
fixed and cannot be adjusted by the Volume
setting of the display.
Do not connect a headset to this output. Use
the headset output socket instead. See

"Connecting the headset audio output"

below.
Connecting the headset audio output
This display provides a stereo headset output
socket for delivering the audio signal to a
stereo headset.
Connect the stereo headset plug (3.5mm
Mini-jack type) to the stereo headset output
socket on the display using a suitable audio
cable.
Once connected, the display speakers will
be muted automatically. The volume level
can be adjusted by pressing the VOL
+
(Volume) and
Avoid prolonged use of the headset or
listening in an excessive volume level,
otherwise your hearing will be damaged.
option in the
Audio
-
buttons on the display.
Audio cable
Headset
Section 1: Quick Start Guide
Audio
amplifier
13